- 
	Oli Suniso 3 GS ( 4 ltr )Oli Suniso 3GS Suniso oil seri GS merupakan minyak pelumas (mineral oil) untuk oli kompresor AC dengan kualitas premium, dirancang untuk digunakan sebagai oli kompresor pendingin. - Oli SUNISO seri GS mampu bekerja dengan baik pada sistem yang menggunakan pendingin HCFC dan CFC, seperti R22, R502 dan R12 ,menunjukkan stabilitas yang sangat baik dan bekerja tanpa masalah di sistem pendingin menggunakan yang menggunkan refrigerant di atas. Selain itu, SUNISO GS juga berfungsi sangat baik pada pendingin alami seperti R717 amonia, R600a isobutane dan R290 propane.
- Oli SUNISO seri GS diproses dari minyak mentah nafta ,diproses dengan menggunakan metode khusus , sehingga menjamin pelumasan yang sangat baik.
- Oli SUNISO seri GS juga telah diterima disetujui oleh semua produsen AC, kulkas, freezer, ternama di dunia.
   Chemical Stability 
 Untuk menolak reaksi kimia dengan pendingin atau bahan lain biasanya hadir dalam sistem. Thermal Stability 
 Untuk menghilangkan deposit karbon yang berlebihan pada hot spot kompresor seperti katup atau port debit. Low Wax Content 
 Untuk mencegah pemisahan lilin flokulan dari campuran minyak-refrigeran pada titik-titik suhu rendah dalam sistem. Low Pour Point 
 Untuk mencegah minyak terpisah dari mengental di garis refrigerant. High Dielectric Strength 
 Untuk memastikan sifat isolasi yang baik. Dalam unit kedap udara, campuran minyak-refrigeran berfungsi sebagai isolator antara motor dan tubuh kompresor. Proper Viscosity 
 Bahkan ketika diencerkan dengan pendingin sehingga untuk memastikan kekuatan film tinggi pada suhu operasi yang tinggi dan sekaligus memberikan fluiditas yang baik di bawah kondisi operasi yang paling dingin. No Contamination 
 Untuk mencegah jaringan parut dari permukaan bantalan, ditusuk dari garis atau port minyak dan kerusakan umum.Rp0,00Oli Suniso 3 GS ( 4 ltr )Rp0,00
- 
	Oli Suniso 4 GS ( 4 ltr )Oli Suniso 4GS Suniso oil seri GS merupakan minyak pelumas (mineral oil) untuk oli kompresor AC dengan kualitas premium, dirancang untuk digunakan sebagai oli kompresor pendingin. - Oli SUNISO seri GS mampu bekerja dengan baik pada sistem yang menggunakan pendingin HCFC dan CFC, seperti R22, R502 dan R12 ,menunjukkan stabilitas yang sangat baik dan bekerja tanpa masalah di sistem pendingin menggunakan yang menggunkan refrigerant di atas. Selain itu, SUNISO GS juga berfungsi sangat baik pada pendingin alami seperti R717 amonia, R600a isobutane dan R290 propane.
- Oli SUNISO seri GS diproses dari minyak mentah nafta ,diproses dengan menggunakan metode khusus , sehingga menjamin pelumasan yang sangat baik.
- Oli SUNISO seri GS juga telah diterima disetujui oleh semua produsen AC, kulkas, freezer, ternama di dunia.
   Chemical Stability 
 Untuk menolak reaksi kimia dengan pendingin atau bahan lain biasanya hadir dalam sistem. Thermal Stability 
 Untuk menghilangkan deposit karbon yang berlebihan pada hot spot kompresor seperti katup atau port debit. Low Wax Content 
 Untuk mencegah pemisahan lilin flokulan dari campuran minyak-refrigeran pada titik-titik suhu rendah dalam sistem. Low Pour Point 
 Untuk mencegah minyak terpisah dari mengental di garis refrigerant. High Dielectric Strength 
 Untuk memastikan sifat isolasi yang baik. Dalam unit kedap udara, campuran minyak-refrigeran berfungsi sebagai isolator antara motor dan tubuh kompresor. Proper Viscosity 
 Bahkan ketika diencerkan dengan pendingin sehingga untuk memastikan kekuatan film tinggi pada suhu operasi yang tinggi dan sekaligus memberikan fluiditas yang baik di bawah kondisi operasi yang paling dingin. No Contamination 
 Untuk mencegah jaringan parut dari permukaan bantalan, ditusuk dari garis atau port minyak dan kerusakan umum.Rp0,00Oli Suniso 4 GS ( 4 ltr )Rp0,00
- 
	Oli Suniso 5 GS ( 4 ltr )Suniso oil seri GS merupakan minyak pelumas (mineral oil) untuk oli kompresor AC dengan kualitas premium, dirancang untuk digunakan sebagai oli kompresor pendingin. - Oli SUNISO seri GS mampu bekerja dengan baik pada sistem yang menggunakan pendingin HCFC dan CFC, seperti R22, R502 dan R12 ,menunjukkan stabilitas yang sangat baik dan bekerja tanpa masalah di sistem pendingin menggunakan yang menggunkan refrigerant di atas. Selain itu, SUNISO GS juga berfungsi sangat baik pada pendingin alami seperti R717 amonia, R600a isobutane dan R290 propane.
- Oli SUNISO seri GS diproses dari minyak mentah nafta ,diproses dengan menggunakan metode khusus , sehingga menjamin pelumasan yang sangat baik.
- Oli SUNISO seri GS juga telah diterima disetujui oleh semua produsen AC, kulkas, freezer, ternama di dunia.
   Chemical Stability 
 Untuk menolak reaksi kimia dengan pendingin atau bahan lain biasanya hadir dalam sistem. Thermal Stability 
 Untuk menghilangkan deposit karbon yang berlebihan pada hot spot kompresor seperti katup atau port debit. Low Wax Content 
 Untuk mencegah pemisahan lilin flokulan dari campuran minyak-refrigeran pada titik-titik suhu rendah dalam sistem. Low Pour Point 
 Untuk mencegah minyak terpisah dari mengental di garis refrigerant. High Dielectric Strength 
 Untuk memastikan sifat isolasi yang baik. Dalam unit kedap udara, campuran minyak-refrigeran berfungsi sebagai isolator antara motor dan tubuh kompresor. Proper Viscosity 
 Bahkan ketika diencerkan dengan pendingin sehingga untuk memastikan kekuatan film tinggi pada suhu operasi yang tinggi dan sekaligus memberikan fluiditas yang baik di bawah kondisi operasi yang paling dingin. No Contamination 
 Untuk mencegah jaringan parut dari permukaan bantalan, ditusuk dari garis atau port minyak dan kerusakan umum.Rp0,00Oli Suniso 5 GS ( 4 ltr )Rp0,00
- 
	Compressor Rotary LG 3HPKami Menjual Compressor Rotary LG 3HP QP 442 PED Specification : Power Source : 1PH, 220-240V, 50Hz Cooling Capacity BTU/HR : 26000/26100 Watts : 7619/7648 Motor Inputs ( Watts ) : 2430/2534 EER ( BTU/W hr ) : 10.7/10.3 COP ( W/W ) : 3.14/3.02 Production by Thailand’s Rp0,00Compressor Rotary LG 3HPRp0,00
- 
	Compressor Maneurop Danfoss MTZ 144-4VMSpecification : Type Code MTZ Net weight 69.00 Kg Approval standards CE; UL Brand technique Reciprocating compressor Capacity control Fixed speed Colour Blue Configuration code Single Connection type Rotolock Cylinder 4 Diameter [mm] 352 Discharge connection height [mm] 125 Discharge connection mounting torque [Nm] 90 Discharge connection pipe size [in] 3/4 Discharge connection rotolock size [in] 1 1/4 Discharge connection size [in] 1 1/4 Discharge connection sleeve pipe size [in] 3/4 Drawing number 8504011e EAN 5702428867382 Economizer No Factory HP [bar] 25 Factory LP [bar] 25 Fitting remark (shipped with rotolock version only) Fitting sleeve ODF Fitting standard Rotolock Frequency [Hz] 50/60 GP LP torque [Nm] 15 Gauge port HP None Gauge port LP Schrader Generation code no Glass mounting Threaded Glass torque [Nm] 50 Gross weight 71.50 Kg High value of nominal voltage at 50Hz [V] 400 High value of nominal voltage at 60Hz [V] 460 High value of voltage range at 50Hz [V] 460 High value of voltage range at 60Hz [V] 506 IP protection class IP54 (with cable gland) LRA 130 A Low value of nominal voltage at 50Hz [V] 380 Low value of nominal voltage at 60Hz [V] 460 Low value of voltage range at 50Hz [V] 340 Low value of voltage range at 60Hz [V] 414 MCC 36 A Model number MTZ144HV4AVE Motor protection Internal overload protector Mounting torque [Nm] 50 Nominal cooling capacity at 50Hz 18.5 Nominal cooling capacity at 60Hz 23.6 Number of starts per hour [Max] 12 Oil charge [L] 3.9 Oil equalization 3/8” flare SAE Oil equalization torque [Nm] 30 Oil reference 160PZ Packaging height [mm] 650 Packaging length [mm] 1150 Packaging weight [Kg] 446 Packaging width [mm] 800 Packing format Industrial pack Packing quantity 6 Phase 3 Power connections Screw connectors 10-32 UNF x 9.5 Refrigerant R134a; R404A; R407A; R407C; R407F; R507A Refrigerant charge [kg] [Max] 10 Relief valve 30 bar/8 bar Rotational speed at 50Hz [rpm] 2900 Rotational speed at 60Hz [rpm] 3500 Segment usage Air conditioning; Refrigeration MT Shipped fittings Suction and discharge solder sleeves, rotolock nuts and gaskets Shipped instructions Installation instructions Shipped mounting Mounting kit with grommets, bolts, nuts, sleeves and washers Shipped oil Initial oil charge Rp0,00
- 
	Compressor Maneurop Danfoss MTZ 125-4VMKami menjual Compressor Maneurop Danfoss MTZ 125-4VM Specification : Type Code MTZ Net weight 67.00 Kg Approval standards CE; UL Brand technique Reciprocating compressor Capacity control Fixed speed Colour Blue Configuration code Single Connection type Rotolock Cylinder 4 Diameter [mm] 352 Discharge connection height [mm] 125 Discharge connection mounting torque [Nm] 90 Discharge connection pipe size [in] 3/4 Discharge connection rotolock size [in] 1 1/4 Discharge connection size [in] 1 1/4 Discharge connection sleeve pipe size [in] 3/4 Drawing number 8504010f EAN 5702428867405 Economizer No Factory HP [bar] 25 Factory LP [bar] 25 Fitting remark (shipped with rotolock version only) Fitting sleeve ODF Fitting standard Rotolock Frequency [Hz] 50/60 GP LP torque [Nm] 15 Gauge port HP None Gauge port LP Schrader Generation code no Glass mounting Threaded Glass torque [Nm] 50 Gross weight 71.17 Kg High value of nominal voltage at 50Hz [V] 400 High value of nominal voltage at 60Hz [V] 460 High value of voltage range at 50Hz [V] 460 High value of voltage range at 60Hz [V] 506 IP protection class IP54 (with cable gland) LRA 105 A Low value of nominal voltage at 50Hz [V] 380 Low value of nominal voltage at 60Hz [V] 460 Low value of voltage range at 50Hz [V] 340 Low value of voltage range at 60Hz [V] 414 MCC 27 A Model number MTZ125HU4VE Motor protection Internal overload protector Mounting torque [Nm] 50 Nominal cooling capacity at 50Hz 15.7 Nominal cooling capacity at 60Hz 20 Number of starts per hour [Max] 12 Oil charge [L] 3.9 Oil equalization 3/8” flare SAE Oil equalization torque [Nm] 30 Oil reference 160PZ Packaging height [mm] 650 Packaging length [mm] 1150 Packaging weight [Kg] 440 Packaging width [mm] 800 Packing format Industrial pack Packing quantity 6 Phase 3 Power connections Screw connectors 10-32 UNF x 9.5 Refrigerant R134a; R404A; R407A; R407C; R407F; R507A Refrigerant charge [kg] [Max] 10 Relief valve 30 bar/8 bar Rotational speed at 50Hz [rpm] 2900 Rotational speed at 60Hz [rpm] 3500 Segment usage Air conditioning; Refrigeration MT Shipped fittings Suction and discharge solder sleeves, rotolock nuts and gaskets Shipped instructions Installation instructions Shipped mounting Mounting kit with grommets, bolts, nuts, sleeves and washers Shipped oil Initial oil charge Rp0,00
- 
	Compressor Maneurop Danfoss MTZ 100-4VMKami menjual Compressor Manuerop Danfoss MTZ 100-4VM Specification : Type Code MTZ Net weight 63.00 Kg Approval standards CE; UL Brand technique Reciprocating compressor Capacity control Fixed speed Colour Blue Configuration code Single Connection type Rotolock Cylinder 4 Diameter [mm] 352 Discharge connection height [mm] 125 Discharge connection mounting torque [Nm] 90 Discharge connection pipe size [in] 3/4 Discharge connection rotolock size [in] 1 1/4 Discharge connection size [in] 1 1/4 Discharge connection sleeve pipe size [in] 3/4 Drawing number 8504010f EAN 5702428867429 Economizer No Factory HP [bar] 25 Factory LP [bar] 25 Fitting remark (shipped with rotolock version only) Fitting sleeve ODF Fitting standard Rotolock Frequency [Hz] 50/60 GP LP torque [Nm] 15 Gauge port HP None Gauge port LP Schrader Generation code no Glass mounting Threaded Glass torque [Nm] 50 Gross weight 65.50 Kg High value of nominal voltage at 50Hz [V] 400 High value of nominal voltage at 60Hz [V] 460 High value of voltage range at 50Hz [V] 460 High value of voltage range at 60Hz [V] 506 IP protection class IP54 (with cable gland) LRA 90 A Low value of nominal voltage at 50Hz [V] 380 Low value of nominal voltage at 60Hz [V] 460 Low value of voltage range at 50Hz [V] 340 Low value of voltage range at 60Hz [V] 414 MCC 22 A Model number MTZ100HS4VE Motor protection Internal overload protector Mounting torque [Nm] 50 Nominal cooling capacity at 50Hz 12.3 Nominal cooling capacity at 60Hz 15.5 Number of starts per hour [Max] 12 Oil charge [L] 3.9 Oil equalization 3/8” flare SAE Oil equalization torque [Nm] 30 Oil reference 160PZ Packaging height [mm] 650 Packaging length [mm] 1150 Packaging weight [Kg] 431 Packaging width [mm] 800 Packing format Industrial pack Packing quantity 6 Phase 3 Power connections Screw connectors 10-32 UNF x 9.5 Refrigerant R134a; R404A; R407A; R407C; R407F; R507A Refrigerant charge [kg] [Max] 10 Relief valve 30 bar/8 bar Rotational speed at 50Hz [rpm] 2900 Rotational speed at 60Hz [rpm] 3500 Segment usage Air conditioning; Refrigeration MT Shipped fittings Suction and discharge solder sleeves, rotolock nuts and gaskets Shipped instructions Installation instructions Shipped mounting Mounting kit with grommets, bolts, nuts, sleeves and washers Shipped oil Initial oil charge Rp0,00
- 
	Compressor Rotary LG 2HPKami Menjual Compressor Rotary LG 2HP QJ 330 PAC Specification : Power Source : 1PH, 220-240V, 50Hz Cooling Capacity BTU/HR : 19900/20000 Watts : 5829/5858 Motor Inputs ( Watts ) : 1877/2040 EER ( BTU/W hr ) : 10.6/9.8 COP ( W/W ) : 3.10/2.87 Production by Thailand’s Rp0,00Compressor Rotary LG 2HPRp0,00
- 
	Compressor Rotary LG 2.5HPKami Menjual Compressor Rotary LG 2.5HP QP 407 PMA Specification : Power Source : 1PH, 220-240V, 50Hz Cooling Capacity BTU/HR : 24050/24300 Watts : 7048/7121 Motor Inputs ( Watts ) : 2227/2314 EER ( BTU/W hr ) : 10.8/10.5 COP ( W/W ) : 3.16/3.08 Production by Thailand’s Rp0,00Compressor Rotary LG 2.5HPRp0,00
- 
	Compressor Rotary LG 1.5HPKami menjual Compressor Rotary LG 1.5HP Qks 208 PAD Specification : Power Source : 1PH, 220-240V, 50Hz Cooling Capacity BTU/HR : 11800/12000 Watts : 3458/3516 Motor Inputs ( Watts ) : 1103/1143 EER ( BTU/W hr ) : 10.7/10.5 COP ( W/W ) : 3.14/3.8 Production by Thailand’s Rp0,00Compressor Rotary LG 1.5HPRp0,00
- 
	Compressor Rotary LG 1 HPKami menjual Copressor Rotary LG 1HP QK 164 Pbb Specification : Power Source : 1PH, 220-240V, 50Hz Cooling Capacity BTU/HR : 9300/9400 Watts : 2725/2755 Motor Inputs ( Watts ) : 877/895 EER ( BTU/W hr ) : 10.6/10.5 COP ( W/W ) : 3.11/3.8 Rp0,00Compressor Rotary LG 1 HPRp0,00
- 
	Compressor Rotary LG 0.75HPKami menjual Compressor Rotary LG 0.75HP Kami menjual Compressor Rotary LG 0.75 HP QK 125 JAA Capacity/BTU : 7100 – 7150 Rp0,00Compressor Rotary LG 0.75HPRp0,00
 
			 
                              
                              
                             