• Ball Valve Castel 1 1/8″

    Ball Valve Castel 3/4″

    01

    DESCRIPTION

    The new Ball Valves 6570/6571 are designed for installation on commercial refrigerating systems and on civil and industrial conditioning plants, which use the following refrigerant fluids: R22, R134a, R404A, R407C, R410A, R507 proper to the group II.

    Ball valves are available in the following two types:

    • Type 6570 (full port) and type 6571 (reduced port) without access fitting.
    • Type 6570/A (full port) with access fitting, These ball valves are equipped with valve core 8394/A and blind nut 7020/20.
    Rp0,00

    Ball Valve Castel 3/4″

    01
    Rp0,00
  • Oil Separator Castel 1 1/8″

    Oil Separator Castel 1 1/8″

    01

    Kami menjual Oil Separator Castel 1 1/8″

    DESCRIPTION

    Castel offers a vast range of oil management and  control products: oil separators, oil level regulators, oil filters and oil reserves. All products are compatible with  HFC refrigerants, and particularly R134a, R404A, R407C, R507 and R410A mixed with POE oils or CFC and HCFC refrigerants mixed with mineral oils.

    Castel menawarkan beragam produk manajemen dan kontrol oli: separator oli, regulator level oli, filter oli, dan cadangan oli. Semua produk kompatibel dengan pendingin HFC, dan khususnya R134a, R404A, R407C, R507 dan R410A dicampur dengan minyak POE atau pendingin CFC dan HCFC yang dicampur dengan minyak mineral.

    Rp0,00

    Oil Separator Castel 1 1/8″

    01
    Rp0,00
  • Ball Valve Danfoss GBC 6S 1/4″

    01

    Kami menjual Ball Valve Danfoss GBC 6S 1/4″

    GBC ball valves are manually operated shut-off valves suitable for applications where bi-directional flow is a requirement.
    GBC valves are approved for applications in liquid, suction, and hot gas lines in refrigeration and air conditioning systems.
    GBC valves offer maximum tightness across the seat and seal, with minimum pressure drop.
    GBC valves give maximum flow in the fully open position. They are designed for operation within a broad temperature range and are approved for use with any fluorinated refrigerant. Standard GBC valves may be used in applications using high pressure refrigerants, including R410A, and GBC bi-directional ball valves can be delivered with or without external access port.
    For CO2 applications a dedicated range is available with a max. working pressure of 90 bar (1300 psig).
    GBC valves are equipped with a one-piece seal cap to prevent tampering. Complies with European Safety Directive EN 378 (Safety and environmental requirements).

    Rp0,00

    Ball Valve Danfoss GBC 6S 1/4″

    01
    Rp0,00
  • Hot

    Expansion Valve Castel 2210/4E

    01
    APPLICATION
    Castel thermostatic expansion valves series 22 regulate the flow of refrigerant liquid into evaporators; the liquid injection is controlled by the refrigerant superheat. The new Castel “22” series are designed to work with interchangeable orifice assembly, to provide flexibility in selection of capacities, and can be used in a wide range of applications as listed below:
    • Refrigeration systems display cases in supermarkets, freezer, ice cream and ice maker machines , transport refrigeration
    • air conditioning systems
    • heat pump systems
    • liquid chillers

    Which use the following refrigerant fluds : R22,  R134A, R404A, R407C, R507 proper to the group II

    OPERATION
    Castel thermostatic expansion valves act as throttle device between the high pressure and the low pressure sides of refrigeration systems and ensure that the rate of refrigerant fl ow into the evaporator exactly matches the rate of evaporation of liquid refrigerant in the evaporator.
    If the actual superheat is higher than the set point the valve feeds the evaporator with more liquid refrigerant, if the actual superheat is lower than the set point the valve decreases the fl ow of liquid refrigerant to the evaporator.
    Thus the evaporator is fully utilized and no liquid refrigerant may reach the compressor.
    Rp0,00

    Expansion Valve Castel 2210/4E

    01
    Rp0,00
  • Expansion Valve Castel 2230/4E

    01
    The new Castel “22” series are designed to work with interchangeable orifice assembly, to provide flexibility in selection of capacities, and can be used in a wide range of applications as listed below:
    • Refrigeration systems display cases in supermarkets, freezer, ice cream and ice maker machines , transport refrigeration
    • air conditioning systems
    • heat pump systems
    • liquid chillers

    Which use the following refrigerant fluds : R22,  R134A, R404A, R407C, R507 proper to the group II

    Rp0,00

    Expansion Valve Castel 2230/4E

    01
    Rp0,00
  • Ball Valve Danfoss GBC 10S 3/8″

    Ball Valve Danfoss GBC 10S 3/8″

    Kami menjual Ball Valve Danfoss GBC 10S 3/8″

    Katup bola GBC dioperasikan secara manual katup penutup yang cocok untuk aplikasi di mana aliran dua arah merupakan persyaratan.
    Katup GBC disetujui untuk aplikasi dalam saluran cairan, hisap, dan gas panas dalam sistem pendingin dan pendingin udara.
    Katup GBC menawarkan keketatan maksimum di kursi dan segel, dengan penurunan tekanan minimum.
    Katup GBC memberikan aliran maksimum dalam posisi terbuka penuh. Mereka dirancang untuk operasi dalam kisaran suhu yang luas dan disetujui untuk digunakan dengan refrigeran berfluorinasi. Katup GBC standar dapat digunakan dalam aplikasi yang menggunakan pendingin bertekanan tinggi, termasuk R410A, dan katup bola dua arah GBC dapat dikirimkan dengan atau tanpa port akses eksternal.
    Untuk aplikasi CO2, rentang khusus tersedia dengan maks. tekanan kerja 90 bar (1300 psig).
    Katup GBC dilengkapi dengan penutup segel satu bagian untuk mencegah gangguan. Sesuai dengan European Safety Directive EN 378 (Persyaratan keselamatan dan lingkungan).

    Rp0,00
  • Ball Valve Danfoss GBC 10S 3/8″

    Ball Valve Danfoss GBC 12S 1/2″

    Kami menjual Ball Valve Danfoss GBC 12S 1/2″

    GBC ball valves are manually operated shut-off valves suitable for applications where bi-directional flow is a requirement.
    GBC valves are approved for applications in liquid, suction, and hot gas lines in refrigeration and air conditioning systems.
    GBC valves offer maximum tightness across the seat and seal, with minimum pressure drop.
    GBC valves give maximum flow in the fully open position. They are designed for operation within a broad temperature range and are approved for use with any fluorinated refrigerant. Standard GBC valves may be used in applications using high pressure refrigerants, including R410A, and GBC bi-directional ball valves can be delivered with or without external access port.
    For CO2 applications a dedicated range is available with a max. working pressure of 90 bar (1300 psig).
    GBC valves are equipped with a one-piece seal cap to prevent tampering. Complies with European Safety Directive EN 378 (Safety and environmental requirements).

    Rp0,00
  • Check Valve Danfoss NRV 10 3/8″

    Check Valve Danfoss NRV 10 3/8″

    DESKRIPSI

    NRV dan NRVH dapat digunakan dalam saluran gas cair, hisap dan panas di pabrik pendingin dan pendingin udara dengan pendingin berfluorinasi. NRV dan NRVH dapat dilengkapi dengan koneksi suar dan solder. Mereka juga tersedia dengan koneksi solder kebesaran yang memberikan fleksibilitas dalam penggunaan katup periksa.

    Rp0,00
  • Check Valve Danfoss NRV 10 3/8″

    Check Valve Danfoss NRV 12 1/2″

    Kami menjual Check Valve Danfoss NRV 12 1/2″

    DESKRIPSI

    NRV dan NRVH dapat digunakan dalam saluran gas cair, hisap dan panas di pabrik pendingin dan pendingin udara dengan pendingin berfluorinasi. NRV dan NRVH dapat dilengkapi dengan koneksi suar dan solder. Mereka juga tersedia dengan koneksi solder kebesaran yang memberikan fleksibilitas dalam penggunaan katup periksa.

    Rp0,00
  • Ball Valve Danfoss GBC 10S 3/8″

    Ball Valve Danfoss GBC 16S 5/8″

    Katup bola GBC dioperasikan secara manual katup penutup yang cocok untuk aplikasi di mana aliran dua arah merupakan persyaratan.
    Katup GBC disetujui untuk aplikasi dalam saluran cairan, hisap, dan gas panas dalam sistem pendingin dan pendingin udara.
    Katup GBC menawarkan keketatan maksimum di kursi dan segel, dengan penurunan tekanan minimum.
    Katup GBC memberikan aliran maksimum dalam posisi terbuka penuh. Mereka dirancang untuk operasi dalam kisaran suhu yang luas dan disetujui untuk digunakan dengan refrigeran berfluorinasi. Katup GBC standar dapat digunakan dalam aplikasi yang menggunakan pendingin bertekanan tinggi, termasuk R410A, dan katup bola dua arah GBC dapat dikirimkan dengan atau tanpa port akses eksternal.
    Untuk aplikasi CO2, rentang khusus tersedia dengan maks. tekanan kerja 90 bar (1300 psig).
    Katup GBC dilengkapi dengan penutup segel satu bagian untuk mencegah gangguan. Sesuai dengan European Safety Directive EN 378 (Persyaratan keselamatan dan lingkungan).

    Rp0,00
  • Ball Valve Danfoss GBC 10S 3/8″

    Ball Valve Danfoss GBC 18S 3/4″

    Katup bola GBC dioperasikan secara manual katup penutup yang cocok untuk aplikasi di mana aliran dua arah merupakan persyaratan.
    Katup GBC disetujui untuk aplikasi dalam saluran cairan, hisap, dan gas panas dalam sistem pendingin dan pendingin udara.
    Katup GBC menawarkan keketatan maksimum di kursi dan segel, dengan penurunan tekanan minimum.
    Katup GBC memberikan aliran maksimum dalam posisi terbuka penuh. Mereka dirancang untuk operasi dalam kisaran suhu yang luas dan disetujui untuk digunakan dengan refrigeran berfluorinasi. Katup GBC standar dapat digunakan dalam aplikasi yang menggunakan pendingin bertekanan tinggi, termasuk R410A, dan katup bola dua arah GBC dapat dikirimkan dengan atau tanpa port akses eksternal.
    Untuk aplikasi CO2, rentang khusus tersedia dengan maks. tekanan kerja 90 bar (1300 psig).
    Katup GBC dilengkapi dengan penutup segel satu bagian untuk mencegah gangguan. Sesuai dengan European Safety Directive EN 378 (Persyaratan keselamatan dan lingkungan).

    Rp0,00
  • Ball Valve Danfoss GBC 10S 3/8″

    Ball Valve Danfoss GBC 22S 7/8″

    Kami menjual Ball Valve Danfoss GBC 22S 7/8″

    GBC ball valves are manually operated shut-off valves suitable for applications where bi-directional flow is a requirement.
    GBC valves are approved for applications in liquid, suction, and hot gas lines in refrigeration and air conditioning systems.
    GBC valves offer maximum tightness across the seat and seal, with minimum pressure drop.
    GBC valves give maximum flow in the fully open position. They are designed for operation within a broad temperature range and are approved for use with any fluorinated refrigerant. Standard GBC valves may be used in applications using high pressure refrigerants, including R410A, and GBC bi-directional ball valves can be delivered with or without external access port.
    For CO2 applications a dedicated range is available with a max. working pressure of 90 bar (1300 psig).
    GBC valves are equipped with a one-piece seal cap to prevent tampering. Complies with European Safety Directive EN 378 (Safety and environmental requirements).

    Rp0,00
Open chat
Butuh Bantuan?
Selamat datang, perlu bantuan?