Jual berbagai macam tools, fitting, sparepart AC berbagai merk 100% Original.

  • Filter Drier Danfoss DML 032

    Filter Drier Danfoss DML 304

    01

    Kami menjual Filter Drier Danfoss DML 304

    DML ELMINATOR hermetic filter driers protect refrigeration and air conditioning systems from moisture, acids and solid particles, eleminating harmful chemical reaction and abrasive impurities . DML hermetic filter driers, with a 100% solid molecular sieve core, are recommended for use with HFO, HC, HFC and HCFC refrigerants . They are hermetic and available in many sizes and connection types .

    APPLICATIONS

    • Traditional refrigeration
    • Air Conditioning units
    • Transport Refrigeration
    • High Drying capacity avoiding the risk of acid formation in the refrigeration system
    • All danfoss filter driers have end caps designed for greater protection and easy removal
    • Wide range with size : 1.5-75 cubic inches
    • Corrosion resistant powder-painted finish, tested for 500 hrs in salt spray
    • 100% 3A molecular sieve core
    • Recommended for use with HFO, HC, HFC, and HCFC refrigerants ( face seal connectors for HFO refrigerants available upon request,please contact your sales representative )
    • PS/MWP up to 46 bar/667 psig
    • Available with flare, solder ( pure cooper, cu-plated ) connections .
    Rp0,00

    Filter Drier Danfoss DML 304

    01
    Rp0,00
  • Filter Drier Danfoss DML 032

    Filter Drier Danfoss DML 305

    01

    Kami menjual Filter Drier Danfoss DML 305

    DML ELMINATOR hermetic filter driers protect refrigeration and air conditioning systems from moisture, acids and solid particles, eleminating harmful chemical reaction and abrasive impurities . DML hermetic filter driers, with a 100% solid molecular sieve core, are recommended for use with HFO, HC, HFC and HCFC refrigerants . They are hermetic and available in many sizes and connection types .

    APPLICATIONS

    • Traditional refrigeration
    • Air Conditioning units
    • Transport Refrigeration
    • High Drying capacity avoiding the risk of acid formation in the refrigeration system
    • All danfoss filter driers have end caps designed for greater protection and easy removal
    • Wide range with size : 1.5-75 cubic inches
    • Corrosion resistant powder-painted finish, tested for 500 hrs in salt spray
    • 100% 3A molecular sieve core
    • Recommended for use with HFO, HC, HFC, and HCFC refrigerants ( face seal connectors for HFO refrigerants available upon request,please contact your sales representative )
    • PS/MWP up to 46 bar/667 psig
    • Available with flare, solder ( pure cooper, cu-plated ) connections .
    Rp0,00

    Filter Drier Danfoss DML 305

    01
    Rp0,00
  • Filter Drier Emerson EK 052-STD 1/4″

    Filter Drier Emerson EK 165-STD 5/8″

    01

    Kami menjual Filter Drier Emerson EK 165-STD 5/8″

    The EK liquid line filter drier is a premium compacted bead filter drier with a 20 micron outlet pad for maximum filtration . The EK is a premium universal replacement luquid line filter drier for CFC, HCFC, and HFC refrigerant including R-12, R-134A, R-22, R-404A, R-407C, R-410A, R-500, R-502 and R-507 .

    FEATURES

    • Filtration first for more effective use of surface area of desiccant .
    • High moisture and acid removal capacity .
    • Solid copper connections .
    • Corrosion resistant epoxy powder paint finish
    • Approved for POE oils with copeland compressor .
    • Shock resistant steel shell contruction .

    SPECIFICATION

    • Desiccant Blend – Optimized for high water capacity and acid capacity .
    • filtration : 20 microns
    • Maximum working pressure : 680 psgi
    • UL/CUL file number : SA 3124
    Rp0,00

    Filter Drier Emerson EK 165-STD 5/8″

    01
    Rp0,00
  • Suction Accumulator Emerson A-AS 1086 1/2″

    Suction Accumulator Emerson A-AS 1086-17 1 1/8″

    01

    Kami menjual Suction Accumulator Emerson A-AS 1086-17 1 1/8 ″

    A-AS melindungi kompresor dari slugging cair dan digunakan dengan pendingin CFC, HCFC, dan HFC. Ini tersedia untuk sistem melalui kapasitas nominal 28 ton.

    FITUR

    Dirancang untuk beroperasi dalam kisaran + 40oF hingga -40oF suhu evaporator
    Fusible Flug pada unit berdiameter lebih besar
    Koneksi tembaga padat
    Cat epoksi Tahan Korosi cat finnish
    Deflektor inlet mengalirkan aliran refrigeran langsung untuk mencegah spalshing internal dan membantu pengumpulan minyak refrigeran

    SPESIFIKASI

    Tekanan kerja maksimum: 450 psig
    Suhu steker yang dapat melebur: 430oF
    Nomor file UL / CUL: SA 10225

    Rp0,00
  • Suction Accumulator Emerson A-AS 1086 1/2″

    Suction Accumulator Emerson A-AS 1086-23 1 3/8″

    01

    The A-AS protects the compressor  from liquid slugging and is used with CFC, HCFC and HFC refrigerants . It is available for systems through 28 tons nominal capacity .

    FEATURES

    • Designed to operate in a range of + 40oF to -40oF evaporator temperature
    • Fusible Flug on larger diameter units
    • Solid copper conections
    • Corrosion Resistant epoxy Powder paint finnish
    • Inlet deflector direct refrigerant flow to prevent internal spalshing and aid in the collection of refrigerant oil

    SPECIFICATIONS

    • Maximum working pressure : 450 psig
    • Fusible plug temperature : 430oF
    • UL/CUL file number : SA 10225
    Rp0,00
  • Ball Valve Danfoss GBC 6S 1/4″

    01

    Kami menjual Ball Valve Danfoss GBC 6S 1/4″

    GBC ball valves are manually operated shut-off valves suitable for applications where bi-directional flow is a requirement.
    GBC valves are approved for applications in liquid, suction, and hot gas lines in refrigeration and air conditioning systems.
    GBC valves offer maximum tightness across the seat and seal, with minimum pressure drop.
    GBC valves give maximum flow in the fully open position. They are designed for operation within a broad temperature range and are approved for use with any fluorinated refrigerant. Standard GBC valves may be used in applications using high pressure refrigerants, including R410A, and GBC bi-directional ball valves can be delivered with or without external access port.
    For CO2 applications a dedicated range is available with a max. working pressure of 90 bar (1300 psig).
    GBC valves are equipped with a one-piece seal cap to prevent tampering. Complies with European Safety Directive EN 378 (Safety and environmental requirements).

    Rp0,00

    Ball Valve Danfoss GBC 6S 1/4″

    01
    Rp0,00
  • Filter Drier Danfoss DML 306

    01

    DML ELMINATOR hermetic filter driers protect refrigeration and air conditioning systems from moisture, acids and solid particles, eleminating harmful chemical reaction and abrasive impurities . DML hermetic filter driers, with a 100% solid molecular sieve core, are recommended for use with HFO, HC, HFC and HCFC refrigerants . They are hermetic and available in many sizes and connection types .

    APPLICATIONS

    • Traditional refrigeration
    • Air Conditioning units
    • Transport Refrigeration
    • High Drying capacity avoiding the risk of acid formation in the refrigeration system
    • All danfoss filter driers have end caps designed for greater protection and easy removal
    • Wide range with size : 1.5-75 cubic inches
    • Corrosion resistant powder-painted finish, tested for 500 hrs in salt spray
    • 100% 3A molecular sieve core
    • Recommended for use with HFO, HC, HFC, and HCFC refrigerants ( face seal connectors for HFO refrigerants available upon request,please contact your sales representative )
    • PS/MWP up to 46 bar/667 psig
    • Available with flare, solder ( pure cooper, cu-plated ) connections .
    Rp0,00

    Filter Drier Danfoss DML 306

    01
    Rp0,00
  • Low Pressure Gauge Danfoss KP 1 Manual

    01
    Product Description

    KP pressure controls are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure. The controls are also used for starting ans stopping refrigeration compressors and fans on air- cooled condensers. KP pressure controls are available in IP 30 and IP 44 enclosures.

    Product Features
    • Ambient temperature:–40 – +65°C (+80°C for max. 2 hours). DIN-approved units:–40 – +65°C (+80°C for max. 2 hours). Max. working pressure = 17 bar Max. test pressure = 20 bar Contact load, AC: AC1: 16 A, 400 V AC3: 16 A, 400 V AC15: 10 A, 400 V Max. starting current (L.R.): 112 A, 400 V Contact load, DC: DC13: 12 W, 220 V control current
    Rp0,00

    Low Pressure Gauge Danfoss KP 1 Manual

    01
    Rp0,00
  • Selenoid Danfoss EVR 6 1/2″

    01
    Product Description

    EVR (NC) is a normally closed, direct or servo operated solenoid valve for liquid, suction and hot gas lines with fluorinated refrigerants. EVR valves are supplied complete or as separate components, i.e. valve body, coil and flanges.

    Product Features
    • Refrigerants: R22/R407C, R404A/R507, R410A, R134a, R407A, R23. For other refrigerants, please contact Danfoss. Temperature of medium: -40 – +105°C (10 W / 12 W coil) Max. 130°C during defrosting. Min. opening differential pressure, EVR 2-3: 0.0 bar, EVR 6-22: 0.05 bar, EVR 25-32: 0.20 bar.
    Rp0,00

    Selenoid Danfoss EVR 6 1/2″

    01
    Rp0,00
  • Expansion Emerson TJRE 18 HW

    01

    The T-Series take-apart valves, with adjustable superheat and replaceable, interchangeable components are ideal for original equipment and field replacements in air conditioning, heart pump and refrigeration applications .

    FEATURES

    • Take-Apart contruction for easy field service
    • External superheat adjustment
    • Bi-Flow capability
    • Stainless Steel power assembly up to 18 tons

    OPTIONS

    • Interchangeable, Replaceable cages
    • Interchangeable Body flanges
    • Interchangeable power assemblies
    • 1/4 to 100 ton capacity

    SPECIFICATIONS

    • Maximum Working pressure : 450 psig
    • Torque : 300 in.ib
    Rp0,00

    Expansion Emerson TJRE 18 HW

    01
    Rp0,00
  • Oil Separator Emerson AW.5590-11 STD 1 3/8″

    01

    OIL SEPARATOR

    A-W&A-F OIL SEPARATOR

    APPLICATION :

    • Multiple compressor rack for supermarkets and air conditioning
    • System with long refrigerant lines
    • Systems with inherent oil return problems
    • Ultra-Low temperature systems
    • For use with HCFCs, HFCs and their lubricants

    FEATURES

    • Hermetic Welded or accessible bolted frange construction
    • Solid copper connections
    • Corrosion Resistant Paint

    SPECIFICATIONS

    • Maximum Working Pressure : 450 psig
    • U.L listed
    • C.S.A Listed ( #LR100624 )
    Rp0,00
  • Hot

    Steam Handen 20A

    01

    Kami menjual Steam Handen 20A

    Specification :

    Motor Kapasitas: 200 Watt | Tekanan: 50 Psi / 700 Kg / Cm | Discharge: 2.9/3.5 L / Min | Rpm: 1430 Rpm | Berat: 9 Kg

    Rp0,00

    Steam Handen 20A

    01
    Rp0,00
Open chat
Butuh Bantuan?
Selamat datang, perlu bantuan?