• Oil Emkarate 3MO

    Oil Emkarate 4MO

    01

    DESCRIPTION

    EMKARATE, RL MO Seriers are formulated from a selection of  highly refined naphthenic mineral oil base stocks to provide outstanding performance and long life in today’s refrigeration systems. RL MO Series lubricants are designed to meet OEM requirements for compressor lubrication at extreme operating conditions .

    EMKARATE, RL MO Series are chemically and thermally stable for cleaner operating performance, has virtually no wax contant which prevents doposits leading to system restrictions while provinding the required miscibility with HCFC, CFC and low GWP natural refrigerant .

    Rp0,00

    Oil Emkarate 4MO

    01
    Rp0,00
  • Low Pressure Gauge Danfoss KP 1 Manual

    01
    Product Description

    KP pressure controls are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure. The controls are also used for starting ans stopping refrigeration compressors and fans on air- cooled condensers. KP pressure controls are available in IP 30 and IP 44 enclosures.

    Product Features
    • Ambient temperature:–40 – +65°C (+80°C for max. 2 hours). DIN-approved units:–40 – +65°C (+80°C for max. 2 hours). Max. working pressure = 17 bar Max. test pressure = 20 bar Contact load, AC: AC1: 16 A, 400 V AC3: 16 A, 400 V AC15: 10 A, 400 V Max. starting current (L.R.): 112 A, 400 V Contact load, DC: DC13: 12 W, 220 V control current
    Rp0,00

    Low Pressure Gauge Danfoss KP 1 Manual

    01
    Rp0,00
  • Compressor Manuerop Danfoss MT 36-4VM

    Compressor Maneurop Danfoss MT100-4VM

    Specification :

    Type Code MT
    Net weight 63.00 Kg
    Approval standards CE; UL
    Brand technique Reciprocating compressor
    Capacity control Fixed speed
    Colour Blue
    Configuration code Single
    Connection type Rotolock
    Cylinder 4
    Diameter [mm] 352
    Discharge connection height [mm] 125
    Discharge connection mounting torque [Nm] 90
    Discharge connection pipe size [in] 3/4
    Discharge connection rotolock size [in] 1 1/4
    Discharge connection size [in] 1 1/4
    Discharge connection sleeve pipe size [in] 3/4
    Drawing number 8504010f
    Economizer No
    Factory HP [bar] 25
    Factory LP [bar] 25
    Fitting remark (shipped with rotolock version only)
    Fitting sleeve ODF
    Fitting standard Rotolock
    Frequency [Hz] 50/60
    GP LP torque [Nm] 15
    Gauge port HP None
    Gauge port LP Schrader
    Generation code D
    Glass mounting Threaded
    Glass torque [Nm] 50
    Gross weight 65.33 Kg
    High value of nominal voltage at 50Hz [V] 400
    High value of nominal voltage at 60Hz [V] 460
    High value of voltage range at 50Hz [V] 460
    High value of voltage range at 60Hz [V] 506
    IP protection class IP54 (with cable gland)
    LRA 90 A
    Low value of nominal voltage at 50Hz [V] 380
    Low value of nominal voltage at 60Hz [V] 460
    Low value of voltage range at 50Hz [V] 340
    Low value of voltage range at 60Hz [V] 414
    MCC 22 A
    Model number MT100HS4DVE
    Motor protection Internal overload protector
    Mounting torque [Nm] 50
    Nominal cooling capacity 60 kBTU/h 95.9
    Nominal cooling capacity at 50Hz 21.3
    Nominal cooling capacity at 60Hz 28.1
    Number of starts per hour [Max] 12
    Oil charge [L] 3.9
    Oil equalization 3/8” flare SAE
    Oil equalization torque [Nm] 30
    Oil reference 160P
    Packaging height [mm] 650
    Packaging length [mm] 1150
    Packaging weight [Kg] 431
    Packaging width [mm] 800
    Packing format Industrial pack
    Packing quantity 6
    Phase 3
    Power connections Screw connectors 10-32 UNF x 9.5
    Refrigerant R22
    Refrigerant charge [kg] [Max] 10
    Relief valve 30 bar/8 bar
    Rotational speed at 50Hz [rpm] 2900
    Rotational speed at 60Hz [rpm] 3500
    Segment usage Air conditioning; Refrigeration MT
    Shipped fittings Suction and discharge solder sleeves, rotolock nuts and gaskets
    Shipped instructions Installation instructions
    Shipped mounting Mounting kit with grommets, bolts, nuts, sleeves and washers
    Shipped oil Initial oil charge
    Speed Platform Fixed-speed
    Rp0,00
  • Oil Emkarate RL 100 H ( 5 LTR )

    Oil Emkarate RL 100 H ( 5 LTR )

    01

    Kami menjual Oil Emkarate RL 100 H ( 5 LTR )

    The Emkarate family of lubricants is a wide range of polyol ester refrigeration oil products. They are designed specifically for use with HFC refrigerants, developed to meet the performance demands of the refrigeration industry. This superior performance is achieved with basefluids that are specifically formulated to deliver optimum performance with minimal additive levels.

    The requirements of today’s refrigeration and air conditioning compressor lubricants are complex. They must be compatible and miscible with the HFC refrigerants, and they must be compatible and miscible with CFC’s and HCFC’s as well as mineral and alkylbenzene oils. Polyol ester lubricants meet these needs, and the EMKARATE RL line is the preferred choice. Working in close collaboration with compressor and system manufacturers, these OEM-approved POE lubricants cover a wide viscosity range from 7 cSt (35-40 SUS) to 220 cSt (1100 SUS) to suit most applications. The lubricants have excellent thermal and chemical stability, and are compatible with a wide range of elastomers, polymeric materials and other materials of construction. Additionally, then higher viscosity index is an indication that their effective viscosity will not change drastically with the wide swings in temperature seen by most typical refrigeration and air conditioning systems. They are the preferred choice for servicing and retrofitting existing equipment as well as for OEM charging.

    Rp0,00

    Oil Emkarate RL 100 H ( 5 LTR )

    01
    Rp0,00
  • Oil Emkarate RL 100 H ( 5 LTR )

    Oil Emkarate RL 170 H ( 5 LTR )

    Kami menjual Oil Emkarate RL 170 H ( 5 LTR )

    The Emkarate family of lubricants is a wide range of polyol ester refrigeration oil products. They are designed specifically for use with HFC refrigerants, developed to meet the performance demands of the refrigeration industry. This superior performance is achieved with basefluids that are specifically formulated to deliver optimum performance with minimal additive levels.

    The requirements of today’s refrigeration and air conditioning compressor lubricants are complex. They must be compatible and miscible with the HFC refrigerants, and they must be compatible and miscible with CFC’s and HCFC’s as well as mineral and alkylbenzene oils. Polyol ester lubricants meet these needs, and the EMKARATE RL line is the preferred choice. Working in close collaboration with compressor and system manufacturers, these OEM-approved POE lubricants cover a wide viscosity range from 7 cSt (35-40 SUS) to 220 cSt (1100 SUS) to suit most applications. The lubricants have excellent thermal and chemical stability, and are compatible with a wide range of elastomers, polymeric materials and other materials of construction. Additionally, then higher viscosity index is an indication that their effective viscosity will not change drastically with the wide swings in temperature seen by most typical refrigeration and air conditioning systems. They are the preferred choice for servicing and retrofitting existing equipment as well as for OEM charging.

    Rp0,00
  • Oil Emkarate RL 100 H ( 5 LTR )

    Oil Emkarate RL 32H ( 5 LTR )

    Kami menjual Oli Emkarate RL 32H ( 5 LTR )

    PRODUCT DESCRIPTION :

    EMKARATE RL 32 H is an iso VG 32 synthetic polyol ester ( POE ) lubricant formulated specifically for use in refrigerantion and air conditioning compressor using HFC refrigerant . this product provides effective wear protection for steel and alumunium surfaces for increaseed system life and improved efficiency and is suitable for both initial fil and service fill . The combination of low temperature charateristics and unparalleled chemical and thermal stability enable the use of emkarate RL 32 H over a wide operating temperature range .

    Rp0,00
  • Oil Emkarate RL 100 H ( 5 LTR )

    Oil Emkarate RL 46 H ( 5 LTR )

    Kami menjual Oil Emkarate RL 46 H ( 5 LTR )

    pelumas Emkarate adalah beragam produk minyak pendingin poliol ester. Mereka dirancang khusus untuk digunakan dengan pendingin HFC, yang dikembangkan untuk memenuhi tuntutan kinerja industri pendingin. Performa superior ini dicapai dengan cairan dasar yang diformulasikan khusus untuk memberikan kinerja optimal dengan tingkat aditif minimal.

    Persyaratan pelumas kompresor dan pendingin udara saat ini sangat kompleks. Mereka harus kompatibel dan larut dengan refrigeran HFC, dan mereka harus kompatibel dan larut dengan CFC dan HCFC serta minyak mineral dan alkilbenzena. Pelumas poliol ester memenuhi kebutuhan ini, dan lini EMKARATE RL adalah pilihan yang lebih disukai. Bekerja dalam kerja sama erat dengan produsen kompresor dan sistem, pelumas POE yang disetujui oleh OEM ini mencakup rentang viskositas yang luas mulai dari 7 cSt (35-40 SUS) hingga 220 cSt (1100 SUS) yang sesuai dengan sebagian besar aplikasi. Pelumas memiliki stabilitas termal dan kimia yang sangat baik, dan kompatibel dengan berbagai elastomer, bahan polimer dan bahan konstruksi lainnya. Selain itu, indeks viskositas yang lebih tinggi merupakan indikasi bahwa viskositas efektif mereka tidak akan berubah secara drastis dengan perubahan suhu yang lebar yang terlihat oleh kebanyakan sistem pendingin dan pendingin udara. Mereka adalah pilihan yang lebih disukai untuk melakukan servis dan perkuatan peralatan yang ada serta untuk pengisian daya OEM.

    Rp0,00
  • Ball Valve Danfoss GBC 10S 3/8″

    Ball Valve Danfoss GBC 10S 3/8″

    Kami menjual Ball Valve Danfoss GBC 10S 3/8″

    Katup bola GBC dioperasikan secara manual katup penutup yang cocok untuk aplikasi di mana aliran dua arah merupakan persyaratan.
    Katup GBC disetujui untuk aplikasi dalam saluran cairan, hisap, dan gas panas dalam sistem pendingin dan pendingin udara.
    Katup GBC menawarkan keketatan maksimum di kursi dan segel, dengan penurunan tekanan minimum.
    Katup GBC memberikan aliran maksimum dalam posisi terbuka penuh. Mereka dirancang untuk operasi dalam kisaran suhu yang luas dan disetujui untuk digunakan dengan refrigeran berfluorinasi. Katup GBC standar dapat digunakan dalam aplikasi yang menggunakan pendingin bertekanan tinggi, termasuk R410A, dan katup bola dua arah GBC dapat dikirimkan dengan atau tanpa port akses eksternal.
    Untuk aplikasi CO2, rentang khusus tersedia dengan maks. tekanan kerja 90 bar (1300 psig).
    Katup GBC dilengkapi dengan penutup segel satu bagian untuk mencegah gangguan. Sesuai dengan European Safety Directive EN 378 (Persyaratan keselamatan dan lingkungan).

    Rp0,00
  • Ball Valve Danfoss GBC 10S 3/8″

    Ball Valve Danfoss GBC 12S 1/2″

    Kami menjual Ball Valve Danfoss GBC 12S 1/2″

    GBC ball valves are manually operated shut-off valves suitable for applications where bi-directional flow is a requirement.
    GBC valves are approved for applications in liquid, suction, and hot gas lines in refrigeration and air conditioning systems.
    GBC valves offer maximum tightness across the seat and seal, with minimum pressure drop.
    GBC valves give maximum flow in the fully open position. They are designed for operation within a broad temperature range and are approved for use with any fluorinated refrigerant. Standard GBC valves may be used in applications using high pressure refrigerants, including R410A, and GBC bi-directional ball valves can be delivered with or without external access port.
    For CO2 applications a dedicated range is available with a max. working pressure of 90 bar (1300 psig).
    GBC valves are equipped with a one-piece seal cap to prevent tampering. Complies with European Safety Directive EN 378 (Safety and environmental requirements).

    Rp0,00
  • Filter Drier Danfoss DML 032

    Filter Drier Danfoss DML 032

    Kami menjual Filter Drier Danfoss DML 032

    DML ELMINATOR hermetic filter driers protect refrigeration and air conditioning systems from moisture, acids and solid particles, eleminating harmful chemical reaction and abrasive impurities . DML hermetic filter driers, with a 100% solid molecular sieve core, are recommended for use with HFO, HC, HFC and HCFC refrigerants . They are hermetic and available in many sizes and connection types .

    APPLICATIONS

    • Traditional refrigeration
    • Air Conditioning units
    • Transport Refrigeration
    • High Drying capacity avoiding the risk of acid formation in the refrigeration system
    • All danfoss filter driers have end caps designed for greater protection and easy removal
    • Wide range with size : 1.5-75 cubic inches
    • Corrosion resistant powder-painted finish, tested for 500 hrs in salt spray
    • 100% 3A molecular sieve core
    • Recommended for use with HFO, HC, HFC, and HCFC refrigerants ( face seal connectors for HFO refrigerants available upon request,please contact your sales representative )
    • PS/MWP up to 46 bar/667 psig
    • Available with flare, solder ( pure cooper, cu-plated ) connections .
    Rp0,00
  • Filter Drier Danfoss DML 032

    Filter Drier Danfoss DML 052

    DML ELMINATOR pengering penyaring kedap udara melindungi sistem pendingin dan sistem pendingin dari kelembaban, asam dan partikel padat, mengeliminasi reaksi kimia berbahaya dan kotoran abrasif. Pengering filter kedap udara DML, dengan inti saringan molekul padat 100%, direkomendasikan untuk digunakan dengan pendingin HFO, HC, HFC, dan HCFC. Mereka kedap udara dan tersedia dalam berbagai ukuran dan tipe koneksi.

    APLIKASI

    • Pendinginan tradisional
    • Unit Pendingin Udara
    • Pendinginan Transportasi
    • Kapasitas pengeringan tinggi menghindari risiko pembentukan asam dalam sistem pendingin
    • Semua pengering filter danfoss memiliki penutup ujung yang dirancang untuk perlindungan yang lebih besar dan penghapusan mudah
    • Kisaran luas dengan ukuran: 1,5-75 inci kubik
    • Selesai dicat bubuk tahan korosi, diuji selama 500 jam dalam semprotan garam
    • 100% inti ayakan molekul 3A
    • Direkomendasikan untuk digunakan dengan pendingin HFO, HC, HFC, dan HCFC (konektor segel wajah untuk pendingin HFO tersedia berdasarkan permintaan, silakan hubungi perwakilan penjualan Anda)
    • PS / MWP hingga 46 bar / 667 psig
    • Tersedia dengan koneksi flare, solder (pure cooper, cu-coated).
    Rp0,00
  • Check Valve Danfoss NRV 10 3/8″

    Check Valve Danfoss NRV 10 3/8″

    DESKRIPSI

    NRV dan NRVH dapat digunakan dalam saluran gas cair, hisap dan panas di pabrik pendingin dan pendingin udara dengan pendingin berfluorinasi. NRV dan NRVH dapat dilengkapi dengan koneksi suar dan solder. Mereka juga tersedia dengan koneksi solder kebesaran yang memberikan fleksibilitas dalam penggunaan katup periksa.

    Rp0,00
Open chat
Butuh Bantuan?
Selamat datang, perlu bantuan?