Best Seller Items
-
Oil Emkarate 4MO
DESCRIPTION
EMKARATE, RL MO Seriers are formulated from a selection of highly refined naphthenic mineral oil base stocks to provide outstanding performance and long life in today’s refrigeration systems. RL MO Series lubricants are designed to meet OEM requirements for compressor lubrication at extreme operating conditions .
EMKARATE, RL MO Series are chemically and thermally stable for cleaner operating performance, has virtually no wax contant which prevents doposits leading to system restrictions while provinding the required miscibility with HCFC, CFC and low GWP natural refrigerant .
Rp0,00Oil Emkarate 4MO
Rp0,00 -
Low Pressure Gauge Danfoss KP 1 Manual
Product Description
KP pressure controls are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure. The controls are also used for starting ans stopping refrigeration compressors and fans on air- cooled condensers. KP pressure controls are available in IP 30 and IP 44 enclosures.
Product Features
- Ambient temperature:–40 – +65°C (+80°C for max. 2 hours). DIN-approved units:–40 – +65°C (+80°C for max. 2 hours). Max. working pressure = 17 bar Max. test pressure = 20 bar Contact load, AC: AC1: 16 A, 400 V AC3: 16 A, 400 V AC15: 10 A, 400 V Max. starting current (L.R.): 112 A, 400 V Contact load, DC: DC13: 12 W, 220 V control current
Rp0,00 -
Compressor Copeland Scroll ZR48KC-TFD-522
Kami menjual Compressor Copeland Scroll ZR48KC-TFD-522
Compressor Copeland Scroll ZR48KC-TFD-522
HCFC, R-22, Mid Point, 50Hz, 3Phase, 380/420V
Capacity/BTU : 40500-47800
Power/Watt : 3600-2490
Current/Amps : 6.1-5
EER ( BTU/wh ) : 11.2-19.2
Mass Flow ( lbs/hr ) : 595.0-615.0
Sound Power ( dBa ) : 68Ave-73Max
Vibration : 2.0Ave-3.0MaxRp0,00 -
Compressor Manuerop Danfoss MT 64-4VM
Kami menjual Compressor Manuerop Danfoss MT 64-4VM
-
Compressor Kulkas Handen ADW 91 1/4hp
Kami menjual Compressor Kulkas Handen ADW 91 1/4hp
220/240Volt – 50/60HZ
R 134A
Rp0,00 -
Compressor Kulkas Handen ADW 43 1/10
Kami menjual Compressor Kulkas Handen ADW 43 1/10
220-240Volt – 50/60HZ
R134A
Rp0,00
-
Suction Line Accumulator Blue Green 7/8″
Specification :
BLR/AAS SUCTION LINE ACCUMULATORS Refrigeration
The BLUE U tube accumulator design is a result of extensive laboratory testing plus detailed investigation of the various accumulators currently available. It takes into account all of the requirements essential for heat pump applications, including safe holding volume (relative to the systems total charge), protected flow control for positive refrigerant and oil return, and minimum pressure drop across the accumulator. BLUE offers standard accumulator models designed for application on heat pump and refrigeration systems from 1 1/2 through 12 tons. Liquid refrigerant holding requirements of suction accumulator may vary by application. Because of the diversity in heat pump systems, accumulator capacity selection should be determined by actual testing. Consult BLUE for assistance if required.
Rp0,00 -
Oil Separator BlueGreen 7/8″
Kami menjual Oil Separator Blue Green BLR/AW-55877 ∅ 102 7/8″ ODS 1/4″ SAE
Rp0,00Oil Separator BlueGreen 7/8″
Rp0,00 -
Selenoid Danfoss EVR 6 1/2″
Product Description
EVR (NC) is a normally closed, direct or servo operated solenoid valve for liquid, suction and hot gas lines with fluorinated refrigerants. EVR valves are supplied complete or as separate components, i.e. valve body, coil and flanges.
Product Features
- Refrigerants: R22/R407C, R404A/R507, R410A, R134a, R407A, R23. For other refrigerants, please contact Danfoss. Temperature of medium: -40 – +105°C (10 W / 12 W coil) Max. 130°C during defrosting. Min. opening differential pressure, EVR 2-3: 0.0 bar, EVR 6-22: 0.05 bar, EVR 25-32: 0.20 bar.
Rp0,00Selenoid Danfoss EVR 6 1/2″
Rp0,00 -
Low Pressure Gauge Danfoss KP 1 Manual
Product Description
KP pressure controls are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure. The controls are also used for starting ans stopping refrigeration compressors and fans on air- cooled condensers. KP pressure controls are available in IP 30 and IP 44 enclosures.
Product Features
- Ambient temperature:–40 – +65°C (+80°C for max. 2 hours). DIN-approved units:–40 – +65°C (+80°C for max. 2 hours). Max. working pressure = 17 bar Max. test pressure = 20 bar Contact load, AC: AC1: 16 A, 400 V AC3: 16 A, 400 V AC15: 10 A, 400 V Max. starting current (L.R.): 112 A, 400 V Contact load, DC: DC13: 12 W, 220 V control current
Rp0,00 -
Low Pressure Gauge Danfoss KP 1 Auto
Product Description
KP pressure controls are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure. The controls are also used for starting ans stopping refrigeration compressors and fans on air- cooled condensers. KP pressure controls are available in IP 30 and IP 44 enclosures.
Product Features
- Ambient temperature:–40 – +65°C (+80°C for max. 2 hours). DIN-approved units:–40 – +65°C (+80°C for max. 2 hours). Max. working pressure = 17 bar Max. test pressure = 20 bar Contact load, AC: AC1: 16 A, 400 V AC3: 16 A, 400 V AC15: 10 A, 400 V Max. starting current (L.R.): 112 A, 400 V Contact load, DC: DC13: 12 W, 220 V control current.
Rp0,00 -
Filter Drier Danfoss DML 306
DML ELMINATOR hermetic filter driers protect refrigeration and air conditioning systems from moisture, acids and solid particles, eleminating harmful chemical reaction and abrasive impurities . DML hermetic filter driers, with a 100% solid molecular sieve core, are recommended for use with HFO, HC, HFC and HCFC refrigerants . They are hermetic and available in many sizes and connection types .
APPLICATIONS
- Traditional refrigeration
- Air Conditioning units
- Transport Refrigeration
- High Drying capacity avoiding the risk of acid formation in the refrigeration system
- All danfoss filter driers have end caps designed for greater protection and easy removal
- Wide range with size : 1.5-75 cubic inches
- Corrosion resistant powder-painted finish, tested for 500 hrs in salt spray
- 100% 3A molecular sieve core
- Recommended for use with HFO, HC, HFC, and HCFC refrigerants ( face seal connectors for HFO refrigerants available upon request,please contact your sales representative )
- PS/MWP up to 46 bar/667 psig
- Available with flare, solder ( pure cooper, cu-plated ) connections .
Rp0,00Filter Drier Danfoss DML 306
Rp0,00 -
Check Valve Danfoss NRV 6 1/4″
DESCRIPTION
NRV and NRVH can be used in liquid, suction and hot gas lines in refrigeration and air conditioning plants with fluorinated refrigerants. NRV and NRVH can be supplied with flare and solder connections. They are also available with oversize solder connections providing flexibility in the use of check valves.
Rp0,00 -
Ball Valve Danfoss GBC 6S 1/4″
Kami menjual Ball Valve Danfoss GBC 6S 1/4″
GBC ball valves are manually operated shut-off valves suitable for applications where bi-directional flow is a requirement.
GBC valves are approved for applications in liquid, suction, and hot gas lines in refrigeration and air conditioning systems.
GBC valves offer maximum tightness across the seat and seal, with minimum pressure drop.
GBC valves give maximum flow in the fully open position. They are designed for operation within a broad temperature range and are approved for use with any fluorinated refrigerant. Standard GBC valves may be used in applications using high pressure refrigerants, including R410A, and GBC bi-directional ball valves can be delivered with or without external access port.
For CO2 applications a dedicated range is available with a max. working pressure of 90 bar (1300 psig).
GBC valves are equipped with a one-piece seal cap to prevent tampering. Complies with European Safety Directive EN 378 (Safety and environmental requirements).Rp0,00 -
Compressor Maneurop Danfoss MTZ 160-4VM
Kami menjual Compressor Manuerop Danfoss MTZ 160-4VM
Specification :
Type Code MTZ Net weight 71.00 Kg Approval standards CE; UL Brand technique Reciprocating compressor Capacity control Fixed speed Colour Blue Configuration code Single Connection type Rotolock Cylinder 4 Diameter [mm] 352 Discharge connection height [mm] 125 Discharge connection mounting torque [Nm] 90 Discharge connection pipe size [in] 3/4 Discharge connection rotolock size [in] 1 1/4 Discharge connection size [in] 1 1/4 Discharge connection sleeve pipe size [in] 3/4 Drawing number 8504011e EAN 5702428867368 Economizer No Factory HP [bar] 25 Factory LP [bar] 25 Fitting remark (shipped with rotolock version only) Fitting sleeve ODF Fitting standard Rotolock Frequency [Hz] 50/60 GP LP torque [Nm] 15 Gauge port HP None Gauge port LP Schrader Generation code no Glass mounting Threaded Glass torque [Nm] 50 Gross weight 73.50 Kg High value of nominal voltage at 50Hz [V] 400 High value of nominal voltage at 60Hz [V] 460 High value of voltage range at 50Hz [V] 460 High value of voltage range at 60Hz [V] 506 IP protection class IP54 (with cable gland) LRA 130 A Low value of nominal voltage at 50Hz [V] 380 Low value of nominal voltage at 60Hz [V] 460 Low value of voltage range at 50Hz [V] 340 Low value of voltage range at 60Hz [V] 414 MCC 36 A Model number MTZ160HW4AVE Motor protection Internal overload protector Mounting torque [Nm] 50 Nominal cooling capacity at 50Hz 20.3 Nominal cooling capacity at 60Hz 25.6 Number of starts per hour [Max] 12 Oil charge [L] 3.9 Oil equalization 3/8” flare SAE Oil equalization torque [Nm] 30 Oil reference 160PZ Packaging height [mm] 650 Packaging length [mm] 1150 Packaging weight [Kg] 446 Packaging width [mm] 800 Packing format Industrial pack Packing quantity 6 Phase 3 Power connections Screw connectors 10-32 UNF x 9.5 Refrigerant R134a; R404A; R407A; R407C; R407F; R507A Refrigerant charge [kg] [Max] 10 Relief valve 30 bar/8 bar Rotational speed at 50Hz [rpm] 2900 Rotational speed at 60Hz [rpm] 3500 Segment usage Air conditioning; Refrigeration MT Shipped fittings Suction and discharge solder sleeves, rotolock nuts and gaskets Shipped instructions Installation instructions Shipped mounting Mounting kit with grommets, bolts, nuts, sleeves and washers Shipped oil Initial oil charge Rp0,00 -
Ball Valve Castel 1/4″
Kami menjual Ball Valve Castel 3/8″
DESCRIPTION
The new Ball Valves 6570/6571 are designed for installation on commercial refrigerating systems and on civil and industrial conditioning plants, which use the following refrigerant fluids: R22, R134a, R404A, R407C, R410A, R507 proper to the group II.
Ball valves are available in the following two types:
*Type 6570 (full port) and type 6571 (reduced port) without access fitting.
*Type 6570/A (full port) with access fitting, These ball valves are equipped with valve core 8394/A and blind nut 7020/20.
——————————————————————————————————-Ball Valves 6570/6571 yang baru dirancang untuk pemasangan pada sistem pendingin komersial dan pada pabrik pendingin sipil dan industri, yang menggunakan cairan pendingin berikut: R22, R134a, R404A, R407C, R410A, R507 yang sesuai untuk kelompok II.
Ball valves tersedia dalam dua jenis berikut:
* Tipe 6570 (port penuh) dan tipe 6571 (port dikurangi) tanpa akses pas.
* Tipe 6570 / A (port penuh) dengan akses pas, katup bola ini dilengkapi dengan inti katup 8394 / A dan mur mur 7020/20.Rp0,00Ball Valve Castel 1/4″
Rp0,00 -
Suction Line Accumulator Blue Green 5/8″
Spesifikasi:
BLR / AAS SUCTION LINE ACCUMULATORS Pendinginan
Desain akumulator tabung BLUE U adalah hasil dari pengujian laboratorium yang luas ditambah investigasi terperinci dari berbagai akumulator yang saat ini tersedia. Ini memperhitungkan semua persyaratan penting untuk aplikasi pompa panas, termasuk volume penyimpanan yang aman (relatif terhadap total muatan sistem), kontrol aliran yang dilindungi untuk refrigeran dan pengembalian oli yang positif, dan penurunan tekanan minimum di akumulator. BLUE menawarkan model akumulator standar yang dirancang untuk aplikasi pada pompa panas dan sistem pendingin mulai 1 1/2 hingga 12 ton. Persyaratan holding pendingin cair dari penghisap hisap dapat berbeda menurut aplikasi. Karena keragaman dalam sistem pompa panas, pemilihan kapasitas akumulator harus ditentukan dengan pengujian yang sebenarnya. Konsultasikan BIRU untuk bantuan jika diperlukan.
Rp0,00 -
Suction Line Accumulator Blue Green 3/4″
Spesifikasi:
BLR / AAS SUCTION LINE ACCUMULATORS Pendinginan
Desain akumulator tabung BLUE U adalah hasil dari pengujian laboratorium yang luas ditambah investigasi terperinci dari berbagai akumulator yang saat ini tersedia. Ini memperhitungkan semua persyaratan penting untuk aplikasi pompa panas, termasuk volume penyimpanan yang aman (relatif terhadap total muatan sistem), kontrol aliran yang dilindungi untuk refrigeran dan pengembalian oli yang positif, dan penurunan tekanan minimum di akumulator. BLUE menawarkan model akumulator standar yang dirancang untuk aplikasi pada pompa panas dan sistem pendingin mulai 1 1/2 hingga 12 ton. Persyaratan holding pendingin cair dari penghisap hisap dapat berbeda menurut aplikasi. Karena keragaman dalam sistem pompa panas, pemilihan kapasitas akumulator harus ditentukan dengan pengujian yang sebenarnya. Konsultasikan BIRU untuk bantuan jika diperlukan.
Rp0,00