Best Seller Items
-
Oil Emkarate 4MO
DESCRIPTION
EMKARATE, RL MO Seriers are formulated from a selection of highly refined naphthenic mineral oil base stocks to provide outstanding performance and long life in today’s refrigeration systems. RL MO Series lubricants are designed to meet OEM requirements for compressor lubrication at extreme operating conditions .
EMKARATE, RL MO Series are chemically and thermally stable for cleaner operating performance, has virtually no wax contant which prevents doposits leading to system restrictions while provinding the required miscibility with HCFC, CFC and low GWP natural refrigerant .
Rp0,00Oil Emkarate 4MO
Rp0,00 -
Low Pressure Gauge Danfoss KP 1 Manual
Product Description
KP pressure controls are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure. The controls are also used for starting ans stopping refrigeration compressors and fans on air- cooled condensers. KP pressure controls are available in IP 30 and IP 44 enclosures.
Product Features
- Ambient temperature:–40 – +65°C (+80°C for max. 2 hours). DIN-approved units:–40 – +65°C (+80°C for max. 2 hours). Max. working pressure = 17 bar Max. test pressure = 20 bar Contact load, AC: AC1: 16 A, 400 V AC3: 16 A, 400 V AC15: 10 A, 400 V Max. starting current (L.R.): 112 A, 400 V Contact load, DC: DC13: 12 W, 220 V control current
Rp0,00 -
Compressor Copeland Scroll ZR48KC-TFD-522
Kami menjual Compressor Copeland Scroll ZR48KC-TFD-522
Compressor Copeland Scroll ZR48KC-TFD-522
HCFC, R-22, Mid Point, 50Hz, 3Phase, 380/420V
Capacity/BTU : 40500-47800
Power/Watt : 3600-2490
Current/Amps : 6.1-5
EER ( BTU/wh ) : 11.2-19.2
Mass Flow ( lbs/hr ) : 595.0-615.0
Sound Power ( dBa ) : 68Ave-73Max
Vibration : 2.0Ave-3.0MaxRp0,00 -
Compressor Manuerop Danfoss MT 64-4VM
Kami menjual Compressor Manuerop Danfoss MT 64-4VM
-
Compressor Kulkas Handen ADW 91 1/4hp
Kami menjual Compressor Kulkas Handen ADW 91 1/4hp
220/240Volt – 50/60HZ
R 134A
Rp0,00 -
Compressor Kulkas Handen ADW 43 1/10
Kami menjual Compressor Kulkas Handen ADW 43 1/10
220-240Volt – 50/60HZ
R134A
Rp0,00
-
Filter Drier Castel D330/5-305 5/8″
FILTER DRIER DESCRIPTION
Filter and liquid/humidity indicators are designed for isntalation on commersial refrigeration systems and civil and industrial air conditioning refrigeration systems employing group II refrigerants . Filter driers are available in a hermetically sealed version or with a solid exchangeable cartridge . Hermetically sealed filters are supplied in the standard drier version, series 43, anti-acid series 42, BI-derectional flow series 45. Filter with a solid exchangeable cartridge are available in packages of 1 to 4 standard drier, anti-acid or mechanical cartridges .
Rp0,00 -
Expansion Valve Castel 2230/4E
The new Castel “22” series are designed to work with interchangeable orifice assembly, to provide flexibility in selection of capacities, and can be used in a wide range of applications as listed below:- Refrigeration systems display cases in supermarkets, freezer, ice cream and ice maker machines , transport refrigeration
- air conditioning systems
- heat pump systems
- liquid chillers
Which use the following refrigerant fluds : R22, R134A, R404A, R407C, R507 proper to the group II
Rp0,00 -
Expansion Valve Castel 2220/4E
APPLICATIONCastel thermostatic expansion valves series 22 regulate the flow of refrigerant liquid into evaporators; the liquid injection is controlled by the refrigerant superheat. The new Castel “22” series are designed to work with interchangeable orifice assembly, to provide flexibility in selection of capacities, and can be used in a wide range of applications as listed below:- Refrigeration systems display cases in supermarkets, freezer, ice cream and ice maker machines , transport refrigeration
- air conditioning systems
- heat pump systems
- liquid chillers
Which use the following refrigerant fluds : R22, R134A, R404A, R407C, R507 proper to the group II
Rp0,00 -
Expansion Valve Castel 2210/4E
APPLICATIONCastel thermostatic expansion valves series 22 regulate the flow of refrigerant liquid into evaporators; the liquid injection is controlled by the refrigerant superheat. The new Castel “22” series are designed to work with interchangeable orifice assembly, to provide flexibility in selection of capacities, and can be used in a wide range of applications as listed below:- Refrigeration systems display cases in supermarkets, freezer, ice cream and ice maker machines , transport refrigeration
- air conditioning systems
- heat pump systems
- liquid chillers
Which use the following refrigerant fluds : R22, R134A, R404A, R407C, R507 proper to the group II
OPERATIONCastel thermostatic expansion valves act as throttle device between the high pressure and the low pressure sides of refrigeration systems and ensure that the rate of refrigerant fl ow into the evaporator exactly matches the rate of evaporation of liquid refrigerant in the evaporator.If the actual superheat is higher than the set point the valve feeds the evaporator with more liquid refrigerant, if the actual superheat is lower than the set point the valve decreases the fl ow of liquid refrigerant to the evaporator.Thus the evaporator is fully utilized and no liquid refrigerant may reach the compressor.Rp0,00 -
Ball Valve Castel 7/8″
DESCRIPTION
The new Ball Valves 6570/6571 are designed for installation on commercial refrigerating systems and on civil and industrial conditioning plants, which use the following refrigerant fluids: R22, R134a, R404A, R407C, R410A, R507 proper to the group II.
Ball valves are available in the following two types:
- Type 6570 (full port) and type 6571 (reduced port) without access fitting.
- Type 6570/A (full port) with access fitting, These ball valves are equipped with valve core 8394/A and blind nut 7020/20.
Rp0,00Ball Valve Castel 7/8″
Rp0,00 -
Ball Valve Castel 5/8″
DESCRIPTION
The new Ball Valves 6570/6571 are designed for installation on commercial refrigerating systems and on civil and industrial conditioning plants, which use the following refrigerant fluids: R22, R134a, R404A, R407C, R410A, R507 proper to the group II.
Ball valves are available in the following two types:
- Type 6570 (full port) and type 6571 (reduced port) without access fitting.
- Type 6570/A (full port) with access fitting, These ball valves are equipped with valve core 8394/A and blind nut 7020/20.
Rp0,00Ball Valve Castel 5/8″
Rp0,00 -
Selenoid Danfoss EVR 6 1/2″
Product Description
EVR (NC) is a normally closed, direct or servo operated solenoid valve for liquid, suction and hot gas lines with fluorinated refrigerants. EVR valves are supplied complete or as separate components, i.e. valve body, coil and flanges.
Product Features
- Refrigerants: R22/R407C, R404A/R507, R410A, R134a, R407A, R23. For other refrigerants, please contact Danfoss. Temperature of medium: -40 – +105°C (10 W / 12 W coil) Max. 130°C during defrosting. Min. opening differential pressure, EVR 2-3: 0.0 bar, EVR 6-22: 0.05 bar, EVR 25-32: 0.20 bar.
Rp0,00Selenoid Danfoss EVR 6 1/2″
Rp0,00 -
Low Pressure Gauge Danfoss KP 1 Manual
Product Description
KP pressure controls are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure. The controls are also used for starting ans stopping refrigeration compressors and fans on air- cooled condensers. KP pressure controls are available in IP 30 and IP 44 enclosures.
Product Features
- Ambient temperature:–40 – +65°C (+80°C for max. 2 hours). DIN-approved units:–40 – +65°C (+80°C for max. 2 hours). Max. working pressure = 17 bar Max. test pressure = 20 bar Contact load, AC: AC1: 16 A, 400 V AC3: 16 A, 400 V AC15: 10 A, 400 V Max. starting current (L.R.): 112 A, 400 V Contact load, DC: DC13: 12 W, 220 V control current
Rp0,00 -
Low Pressure Gauge Danfoss KP 1 Auto
Product Description
KP pressure controls are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure. The controls are also used for starting ans stopping refrigeration compressors and fans on air- cooled condensers. KP pressure controls are available in IP 30 and IP 44 enclosures.
Product Features
- Ambient temperature:–40 – +65°C (+80°C for max. 2 hours). DIN-approved units:–40 – +65°C (+80°C for max. 2 hours). Max. working pressure = 17 bar Max. test pressure = 20 bar Contact load, AC: AC1: 16 A, 400 V AC3: 16 A, 400 V AC15: 10 A, 400 V Max. starting current (L.R.): 112 A, 400 V Contact load, DC: DC13: 12 W, 220 V control current.
Rp0,00 -
Filter Drier Danfoss DML 306
DML ELMINATOR hermetic filter driers protect refrigeration and air conditioning systems from moisture, acids and solid particles, eleminating harmful chemical reaction and abrasive impurities . DML hermetic filter driers, with a 100% solid molecular sieve core, are recommended for use with HFO, HC, HFC and HCFC refrigerants . They are hermetic and available in many sizes and connection types .
APPLICATIONS
- Traditional refrigeration
- Air Conditioning units
- Transport Refrigeration
- High Drying capacity avoiding the risk of acid formation in the refrigeration system
- All danfoss filter driers have end caps designed for greater protection and easy removal
- Wide range with size : 1.5-75 cubic inches
- Corrosion resistant powder-painted finish, tested for 500 hrs in salt spray
- 100% 3A molecular sieve core
- Recommended for use with HFO, HC, HFC, and HCFC refrigerants ( face seal connectors for HFO refrigerants available upon request,please contact your sales representative )
- PS/MWP up to 46 bar/667 psig
- Available with flare, solder ( pure cooper, cu-plated ) connections .
Rp0,00Filter Drier Danfoss DML 306
Rp0,00 -
Check Valve Danfoss NRV 6 1/4″
DESCRIPTION
NRV and NRVH can be used in liquid, suction and hot gas lines in refrigeration and air conditioning plants with fluorinated refrigerants. NRV and NRVH can be supplied with flare and solder connections. They are also available with oversize solder connections providing flexibility in the use of check valves.
Rp0,00 -
Ball Valve Danfoss GBC 6S 1/4″
Kami menjual Ball Valve Danfoss GBC 6S 1/4″
GBC ball valves are manually operated shut-off valves suitable for applications where bi-directional flow is a requirement.
GBC valves are approved for applications in liquid, suction, and hot gas lines in refrigeration and air conditioning systems.
GBC valves offer maximum tightness across the seat and seal, with minimum pressure drop.
GBC valves give maximum flow in the fully open position. They are designed for operation within a broad temperature range and are approved for use with any fluorinated refrigerant. Standard GBC valves may be used in applications using high pressure refrigerants, including R410A, and GBC bi-directional ball valves can be delivered with or without external access port.
For CO2 applications a dedicated range is available with a max. working pressure of 90 bar (1300 psig).
GBC valves are equipped with a one-piece seal cap to prevent tampering. Complies with European Safety Directive EN 378 (Safety and environmental requirements).Rp0,00