-
1 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00 -
2 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00 -
2 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00
-
1 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00 -
2 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00
-
2 × Rp0,00 -
1 × Rp0,00
-
1 × Rp0,00
-
1 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00 -
2 × Rp0,00
-
1 × Rp0,00
-
1 × Rp0,00
-
2 × Rp0,00
-
1 × Rp0,00 -
1 × Rp0,00
-
1 × Rp0,00
-
1 × Rp0,00
-
1 × Rp0,00
-
1 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00
Best Seller Items
-
Compressor Manuerop Danfoss MT 64-4VM
Kami menjual Compressor Manuerop Danfoss MT 64-4VM
-
Pipa Set 1/4×5/8x30M HD Inverter
Kami menjual Pipa Set 2-2.5HP 1/4×5/8x30M HD Inverter
Rp0,00 -
Pipa Tembaga Roll 3/16″ HD
Kami menjual 3/16” hd (4.76mm) x0.76mmx15m
Rp0,00Pipa Tembaga Roll 3/16″ HD
Rp0,00 -
Oil Emkarate RL 100 H ( 5 LTR )
Kami menjual Oil Emkarate RL 100 H ( 5 LTR )
The Emkarate family of lubricants is a wide range of polyol ester refrigeration oil products. They are designed specifically for use with HFC refrigerants, developed to meet the performance demands of the refrigeration industry. This superior performance is achieved with basefluids that are specifically formulated to deliver optimum performance with minimal additive levels.
The requirements of today’s refrigeration and air conditioning compressor lubricants are complex. They must be compatible and miscible with the HFC refrigerants, and they must be compatible and miscible with CFC’s and HCFC’s as well as mineral and alkylbenzene oils. Polyol ester lubricants meet these needs, and the EMKARATE RL line is the preferred choice. Working in close collaboration with compressor and system manufacturers, these OEM-approved POE lubricants cover a wide viscosity range from 7 cSt (35-40 SUS) to 220 cSt (1100 SUS) to suit most applications. The lubricants have excellent thermal and chemical stability, and are compatible with a wide range of elastomers, polymeric materials and other materials of construction. Additionally, then higher viscosity index is an indication that their effective viscosity will not change drastically with the wide swings in temperature seen by most typical refrigeration and air conditioning systems. They are the preferred choice for servicing and retrofitting existing equipment as well as for OEM charging.
Rp0,00 -
Filter Drier Danfoss DML 304
Kami menjual Filter Drier Danfoss DML 304
DML ELMINATOR hermetic filter driers protect refrigeration and air conditioning systems from moisture, acids and solid particles, eleminating harmful chemical reaction and abrasive impurities . DML hermetic filter driers, with a 100% solid molecular sieve core, are recommended for use with HFO, HC, HFC and HCFC refrigerants . They are hermetic and available in many sizes and connection types .
APPLICATIONS
- Traditional refrigeration
- Air Conditioning units
- Transport Refrigeration
- High Drying capacity avoiding the risk of acid formation in the refrigeration system
- All danfoss filter driers have end caps designed for greater protection and easy removal
- Wide range with size : 1.5-75 cubic inches
- Corrosion resistant powder-painted finish, tested for 500 hrs in salt spray
- 100% 3A molecular sieve core
- Recommended for use with HFO, HC, HFC, and HCFC refrigerants ( face seal connectors for HFO refrigerants available upon request,please contact your sales representative )
- PS/MWP up to 46 bar/667 psig
- Available with flare, solder ( pure cooper, cu-plated ) connections .
Rp0,00Filter Drier Danfoss DML 304
Rp0,00 -
Filter Drier Danfoss DML 305
Kami menjual Filter Drier Danfoss DML 305
DML ELMINATOR hermetic filter driers protect refrigeration and air conditioning systems from moisture, acids and solid particles, eleminating harmful chemical reaction and abrasive impurities . DML hermetic filter driers, with a 100% solid molecular sieve core, are recommended for use with HFO, HC, HFC and HCFC refrigerants . They are hermetic and available in many sizes and connection types .
APPLICATIONS
- Traditional refrigeration
- Air Conditioning units
- Transport Refrigeration
- High Drying capacity avoiding the risk of acid formation in the refrigeration system
- All danfoss filter driers have end caps designed for greater protection and easy removal
- Wide range with size : 1.5-75 cubic inches
- Corrosion resistant powder-painted finish, tested for 500 hrs in salt spray
- 100% 3A molecular sieve core
- Recommended for use with HFO, HC, HFC, and HCFC refrigerants ( face seal connectors for HFO refrigerants available upon request,please contact your sales representative )
- PS/MWP up to 46 bar/667 psig
- Available with flare, solder ( pure cooper, cu-plated ) connections .
Rp0,00Filter Drier Danfoss DML 305
Rp0,00
-
Selenoid Danfoss EVR 15 7/8″
Kami menjual Selenoid Danfoss EVR 15 7/8″
Product Description
KP pressure controls are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure. The controls are also used for starting ans stopping refrigeration compressors and fans on air- cooled condensers. KP pressure controls are available in IP 30 and IP 44 enclosures.
Product Features
- Ambient temperature:–40 – +65°C (+80°C for max. 2 hours). DIN-approved units:–40 – +65°C (+80°C for max. 2 hours). Max. working pressure = 17 bar Max. test pressure = 20 bar Contact load, AC: AC1: 16 A, 400 V AC3: 16 A, 400 V AC15: 10 A, 400 V Max. starting current (L.R.): 112 A, 400 V Contact load, DC: DC13: 12 W, 220 V control current
Rp0,00Selenoid Danfoss EVR 15 7/8″
Rp0,00 -
Selenoid Danfoss EVR 2 1/4″
Kami menjual Selenoid Danfoss EVR 2 1/4″
Product Description
EVR (NC) is a normally closed, direct or servo operated solenoid valve for liquid, suction and hot gas lines with fluorinated refrigerants. EVR valves are supplied complete or as separate components, i.e. valve body, coil and flanges.
Product Features
- Refrigerants: R22/R407C, R404A/R507, R410A, R134a, R407A, R23. For other refrigerants, please contact Danfoss. Temperature of medium: -40 – +105°C (10 W / 12 W coil) Max. 130°C during defrosting. Min. opening differential pressure, EVR 2-3: 0.0 bar, EVR 6-22: 0.05 bar, EVR 25-32: 0.20 bar.
Rp0,00Selenoid Danfoss EVR 2 1/4″
Rp0,00 -
Selenoid Danfoss EVR 3 3/8″
Kami menjual Selenoid Danfoss EVR 3 3/8″
Product Description
EVR (NC) is a normally closed, direct or servo operated solenoid valve for liquid, suction and hot gas lines with fluorinated refrigerants. EVR valves are supplied complete or as separate components, i.e. valve body, coil and flanges.
Product Features
- Refrigerants: R22/R407C, R404A/R507, R410A, R134a, R407A, R23. For other refrigerants, please contact Danfoss. Temperature of medium: -40 – +105°C (10 W / 12 W coil) Max. 130°C during defrosting. Min. opening differential pressure, EVR 2-3: 0.0 bar, EVR 6-22: 0.05 bar, EVR 25-32: 0.20 bar.
Rp0,00Selenoid Danfoss EVR 3 3/8″
Rp0,00 -
Selenoid Danfoss EVR 6 1/2″
Product Description
EVR (NC) is a normally closed, direct or servo operated solenoid valve for liquid, suction and hot gas lines with fluorinated refrigerants. EVR valves are supplied complete or as separate components, i.e. valve body, coil and flanges.
Product Features
- Refrigerants: R22/R407C, R404A/R507, R410A, R134a, R407A, R23. For other refrigerants, please contact Danfoss. Temperature of medium: -40 – +105°C (10 W / 12 W coil) Max. 130°C during defrosting. Min. opening differential pressure, EVR 2-3: 0.0 bar, EVR 6-22: 0.05 bar, EVR 25-32: 0.20 bar.
Rp0,00Selenoid Danfoss EVR 6 1/2″
Rp0,00 -
Selenoid Valve Castel 1/2″
Kami menjual Selenoid Valve Castel 1/2″
SELENOID VALVES DESCRIPTION
Solenoid valves are designed for instalation on commercial refrigeration systems and civil and industrial air conditioning systems employing the following refrigerants : R22, R134A, R404A, R407C, 410A, R507 in group II . contact castel’s technical office for information on specific applications with refrigerant which are not listed above but do belong to group II . Available in normally closed org NC and normally open or no versions, with connections from 1/4″ to 2 1/8″ and vast range of reels and connectors .
Katup solenoid dirancang untuk pemasangan pada sistem pendingin komersial dan sistem pendingin udara sipil dan industri yang menggunakan pendingin berikut: R22, R134A, R404A, R407C, 410A, R507 dalam kelompok II. hubungi kantor teknis castel untuk informasi tentang aplikasi spesifik dengan refrigeran yang tidak tercantum di atas tetapi milik grup II. Tersedia dalam versi NC yang biasanya tertutup dan biasanya terbuka atau tanpa versi, dengan koneksi dari 1/4 ″ hingga 2 1/8 ″ dan berbagai macam gulungan dan konektor.
Rp0,00Selenoid Valve Castel 1/2″
Rp0,00 -
Selenoid Valve Castel 1/4″
Kami menjual Selenoid Valve Castel 1/4″
SELENOID VALVES DESCRIPTION
Solenoid valves are designed for instalation on commercial refrigeration systems and civil and industrial air conditioning systems employing the following refrigerants : R22, R134A, R404A, R407C, 410A, R507 in group II . contact castel’s technical office for information on specific applications with refrigerant which are not listed above but do belong to group II . Available in normally closed org NC and normally open or no versions, with connections from 1/4″ to 2 1/8″ and vast range of reels and connectors .
Katup solenoid dirancang untuk pemasangan pada sistem pendingin komersial dan sistem pendingin udara sipil dan industri yang menggunakan pendingin berikut: R22, R134A, R404A, R407C, 410A, R507 dalam kelompok II. hubungi kantor teknis castel untuk informasi tentang aplikasi spesifik dengan refrigeran yang tidak tercantum di atas tetapi milik grup II. Tersedia dalam versi NC yang biasanya tertutup dan biasanya terbuka atau tanpa versi, dengan koneksi dari 1/4 ″ hingga 2 1/8 ″ dan berbagai macam gulungan dan konektor.
Rp0,00Selenoid Valve Castel 1/4″
Rp0,00 -
Selenoid Valve Castel 3/4″
Kami menjual Selenoid Valve Castel 3/4″
SELENOID VALVES DESCRIPTION
Solenoid valves are designed for instalation on commercial refrigeration systems and civil and industrial air conditioning systems employing the following refrigerants : R22, R134A, R404A, R407C, 410A, R507 in group II . contact castel’s technical office for information on specific applications with refrigerant which are not listed above but do belong to group II . Available in normally closed org NC and normally open or no versions, with connections from 13/4/4″ to 2 1/8″ and vast range of reels and connectors .
Katup solenoid dirancang untuk pemasangan pada sistem pendingin komersial dan sistem pendingin udara sipil dan industri yang menggunakan pendingin berikut: R22, R134A, R404A, R407C, 410A, R507 dalam kelompok II. hubungi kantor teknis castel untuk informasi tentang aplikasi spesifik dengan refrigeran yang tidak tercantum di atas tetapi milik grup II. Tersedia dalam versi NC yang biasanya tertutup dan biasanya terbuka atau tanpa versi, dengan koneksi dari 13/4/4 ″ hingga 2 1/8 ″ dan berbagai pilihan gulungan dan konektor.
Rp0,00Selenoid Valve Castel 3/4″
Rp0,00 -
Selenoid Valve Castel 3/8″
Kami menjual Selenoid Valve Castel 3/8″
SELENOID VALVES DESCRIPTION
Solenoid valves are designed for instalation on commercial refrigeration systems and civil and industrial air conditioning systems employing the following refrigerants : R22, R134A, R404A, R407C, 410A, R507 in group II . contact castel’s technical office for information on specific applications with refrigerant which are not listed above but do belong to group II . Available in normally closed org NC and normally open or no versions, with connections from 1/4″ to 2 1/8″ and vast range of reels and connectors .
Katup solenoid dirancang untuk pemasangan pada sistem pendingin komersial dan sistem pendingin udara sipil dan industri yang menggunakan pendingin berikut: R22, R134A, R404A, R407C, 410A, R507 dalam kelompok II. hubungi kantor teknis castel untuk informasi tentang aplikasi spesifik dengan refrigeran yang tidak tercantum di atas tetapi milik grup II. Tersedia dalam versi NC yang biasanya tertutup dan biasanya terbuka atau tanpa versi, dengan koneksi dari 1/4 ″ hingga 2 1/8 ″ dan berbagai macam gulungan dan konektor.
Rp0,00Selenoid Valve Castel 3/8″
Rp0,00 -
Selenoid Valve Castel 5/8″
SELENOID VALVES DESCRIPTION
Solenoid valves are designed for instalation on commercial refrigeration systems and civil and industrial air conditioning systems employing the following refrigerants : R22, R134A, R404A, R407C, 410A, R507 in group II . contact castel’s technical office for information on specific applications with refrigerant which are not listed above but do belong to group II . Available in normally closed org NC and normally open or no versions, with connections from 1/4″ to 2 1/8″ and vast range of reels and connectors .
Rp0,00Selenoid Valve Castel 5/8″
Rp0,00 -
Steam Handen 20A
Kami menjual Steam Handen 20A
Specification :
Motor Kapasitas: 200 Watt | Tekanan: 50 Psi / 700 Kg / Cm | Discharge: 2.9/3.5 L / Min | Rpm: 1430 Rpm | Berat: 9 Kg
Rp0,00Steam Handen 20A
Rp0,00 -
Suction Accumulator Blue Green 1 1/8″
Kami menjual Suction Accumulator Blue Green BLR/AAS-5139 ∅ 127 1 1/8″ ODS 3.5L
Specification :
BLR/AAS SUCTION LINE ACCUMULATORS Refrigeration
Desain akumulator tabung BLUE U adalah hasil dari pengujian laboratorium yang luas ditambah investigasi terperinci dari berbagai akumulator yang saat ini tersedia. Ini memperhitungkan semua persyaratan penting untuk aplikasi pompa panas, termasuk volume penyimpanan yang aman (relatif terhadap total muatan sistem), kontrol aliran yang dilindungi untuk refrigeran dan pengembalian oli yang positif, dan penurunan tekanan minimum di akumulator. BLUE menawarkan model akumulator standar yang dirancang untuk aplikasi pada pompa panas dan sistem pendingin mulai 1 1/2 hingga 12 ton. Persyaratan holding pendingin cair dari penghisap hisap dapat berbeda menurut aplikasi. Karena keragaman dalam sistem pompa panas, pemilihan kapasitas akumulator harus ditentukan dengan pengujian yang sebenarnya. Konsultasikan BIRU untuk bantuan jika diperlukan.
Rp0,00 -
Suction Accumulator Blue Green 1 3/8″
Kami menjual Suction Accumulator Blue Green BLR/AAS-51711 ∅ 127 1 3/8″ ODS 4.7L
Specification :
BLR/AAS SUCTION LINE ACCUMULATORS Refrigeration
Desain akumulator tabung BLUE U adalah hasil dari pengujian laboratorium yang luas ditambah investigasi terperinci dari berbagai akumulator yang saat ini tersedia. Ini memperhitungkan semua persyaratan penting untuk aplikasi pompa panas, termasuk volume penyimpanan yang aman (relatif terhadap total muatan sistem), kontrol aliran yang dilindungi untuk refrigeran dan pengembalian oli yang positif, dan penurunan tekanan minimum di akumulator. BLUE menawarkan model akumulator standar yang dirancang untuk aplikasi pada pompa panas dan sistem pendingin mulai 1 1/2 hingga 12 ton. Persyaratan holding pendingin cair dari penghisap hisap dapat berbeda menurut aplikasi. Karena keragaman dalam sistem pompa panas, pemilihan kapasitas akumulator harus ditentukan dengan pengujian yang sebenarnya. Konsultasikan BIRU untuk bantuan jika diperlukan.
Rp0,00