Best Seller Items
-
Oil Emkarate 4MO
DESCRIPTION
EMKARATE, RL MO Seriers are formulated from a selection of highly refined naphthenic mineral oil base stocks to provide outstanding performance and long life in today’s refrigeration systems. RL MO Series lubricants are designed to meet OEM requirements for compressor lubrication at extreme operating conditions .
EMKARATE, RL MO Series are chemically and thermally stable for cleaner operating performance, has virtually no wax contant which prevents doposits leading to system restrictions while provinding the required miscibility with HCFC, CFC and low GWP natural refrigerant .
Rp0,00Oil Emkarate 4MO
Rp0,00 -
Low Pressure Gauge Danfoss KP 1 Manual
Product Description
KP pressure controls are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure. The controls are also used for starting ans stopping refrigeration compressors and fans on air- cooled condensers. KP pressure controls are available in IP 30 and IP 44 enclosures.
Product Features
- Ambient temperature:–40 – +65°C (+80°C for max. 2 hours). DIN-approved units:–40 – +65°C (+80°C for max. 2 hours). Max. working pressure = 17 bar Max. test pressure = 20 bar Contact load, AC: AC1: 16 A, 400 V AC3: 16 A, 400 V AC15: 10 A, 400 V Max. starting current (L.R.): 112 A, 400 V Contact load, DC: DC13: 12 W, 220 V control current
Rp0,00 -
Compressor Copeland Scroll ZR48KC-TFD-522
Kami menjual Compressor Copeland Scroll ZR48KC-TFD-522
Compressor Copeland Scroll ZR48KC-TFD-522
HCFC, R-22, Mid Point, 50Hz, 3Phase, 380/420V
Capacity/BTU : 40500-47800
Power/Watt : 3600-2490
Current/Amps : 6.1-5
EER ( BTU/wh ) : 11.2-19.2
Mass Flow ( lbs/hr ) : 595.0-615.0
Sound Power ( dBa ) : 68Ave-73Max
Vibration : 2.0Ave-3.0MaxRp0,00 -
Compressor Kulkas Handen ADW 91 1/4hp
Kami menjual Compressor Kulkas Handen ADW 91 1/4hp
220/240Volt – 50/60HZ
R 134A
Rp0,00 -
Compressor Kulkas Handen ADW 43 1/10
Kami menjual Compressor Kulkas Handen ADW 43 1/10
220-240Volt – 50/60HZ
R134A
Rp0,00 -
Compressor Manuerop Danfoss MT 64-4VM
Kami menjual Compressor Manuerop Danfoss MT 64-4VM
-
Selenoid Danfoss EVR 15 7/8″
Kami menjual Selenoid Danfoss EVR 15 7/8″
Product Description
KP pressure controls are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure. The controls are also used for starting ans stopping refrigeration compressors and fans on air- cooled condensers. KP pressure controls are available in IP 30 and IP 44 enclosures.
Product Features
- Ambient temperature:–40 – +65°C (+80°C for max. 2 hours). DIN-approved units:–40 – +65°C (+80°C for max. 2 hours). Max. working pressure = 17 bar Max. test pressure = 20 bar Contact load, AC: AC1: 16 A, 400 V AC3: 16 A, 400 V AC15: 10 A, 400 V Max. starting current (L.R.): 112 A, 400 V Contact load, DC: DC13: 12 W, 220 V control current
Rp0,00Selenoid Danfoss EVR 15 7/8″
Rp0,00 -
Selenoid Danfoss EVR 2 1/4″
Kami menjual Selenoid Danfoss EVR 2 1/4″
Product Description
EVR (NC) is a normally closed, direct or servo operated solenoid valve for liquid, suction and hot gas lines with fluorinated refrigerants. EVR valves are supplied complete or as separate components, i.e. valve body, coil and flanges.
Product Features
- Refrigerants: R22/R407C, R404A/R507, R410A, R134a, R407A, R23. For other refrigerants, please contact Danfoss. Temperature of medium: -40 – +105°C (10 W / 12 W coil) Max. 130°C during defrosting. Min. opening differential pressure, EVR 2-3: 0.0 bar, EVR 6-22: 0.05 bar, EVR 25-32: 0.20 bar.
Rp0,00Selenoid Danfoss EVR 2 1/4″
Rp0,00 -
Selenoid Danfoss EVR 3 3/8″
Kami menjual Selenoid Danfoss EVR 3 3/8″
Product Description
EVR (NC) is a normally closed, direct or servo operated solenoid valve for liquid, suction and hot gas lines with fluorinated refrigerants. EVR valves are supplied complete or as separate components, i.e. valve body, coil and flanges.
Product Features
- Refrigerants: R22/R407C, R404A/R507, R410A, R134a, R407A, R23. For other refrigerants, please contact Danfoss. Temperature of medium: -40 – +105°C (10 W / 12 W coil) Max. 130°C during defrosting. Min. opening differential pressure, EVR 2-3: 0.0 bar, EVR 6-22: 0.05 bar, EVR 25-32: 0.20 bar.
Rp0,00Selenoid Danfoss EVR 3 3/8″
Rp0,00 -
Selenoid Danfoss EVR 6 1/2″
Product Description
EVR (NC) is a normally closed, direct or servo operated solenoid valve for liquid, suction and hot gas lines with fluorinated refrigerants. EVR valves are supplied complete or as separate components, i.e. valve body, coil and flanges.
Product Features
- Refrigerants: R22/R407C, R404A/R507, R410A, R134a, R407A, R23. For other refrigerants, please contact Danfoss. Temperature of medium: -40 – +105°C (10 W / 12 W coil) Max. 130°C during defrosting. Min. opening differential pressure, EVR 2-3: 0.0 bar, EVR 6-22: 0.05 bar, EVR 25-32: 0.20 bar.
Rp0,00Selenoid Danfoss EVR 6 1/2″
Rp0,00 -
Selenoid Valve Castel 1/2″
Kami menjual Selenoid Valve Castel 1/2″
SELENOID VALVES DESCRIPTION
Solenoid valves are designed for instalation on commercial refrigeration systems and civil and industrial air conditioning systems employing the following refrigerants : R22, R134A, R404A, R407C, 410A, R507 in group II . contact castel’s technical office for information on specific applications with refrigerant which are not listed above but do belong to group II . Available in normally closed org NC and normally open or no versions, with connections from 1/4″ to 2 1/8″ and vast range of reels and connectors .
Katup solenoid dirancang untuk pemasangan pada sistem pendingin komersial dan sistem pendingin udara sipil dan industri yang menggunakan pendingin berikut: R22, R134A, R404A, R407C, 410A, R507 dalam kelompok II. hubungi kantor teknis castel untuk informasi tentang aplikasi spesifik dengan refrigeran yang tidak tercantum di atas tetapi milik grup II. Tersedia dalam versi NC yang biasanya tertutup dan biasanya terbuka atau tanpa versi, dengan koneksi dari 1/4 ″ hingga 2 1/8 ″ dan berbagai macam gulungan dan konektor.
Rp0,00Selenoid Valve Castel 1/2″
Rp0,00 -
Selenoid Valve Castel 1/4″
Kami menjual Selenoid Valve Castel 1/4″
SELENOID VALVES DESCRIPTION
Solenoid valves are designed for instalation on commercial refrigeration systems and civil and industrial air conditioning systems employing the following refrigerants : R22, R134A, R404A, R407C, 410A, R507 in group II . contact castel’s technical office for information on specific applications with refrigerant which are not listed above but do belong to group II . Available in normally closed org NC and normally open or no versions, with connections from 1/4″ to 2 1/8″ and vast range of reels and connectors .
Katup solenoid dirancang untuk pemasangan pada sistem pendingin komersial dan sistem pendingin udara sipil dan industri yang menggunakan pendingin berikut: R22, R134A, R404A, R407C, 410A, R507 dalam kelompok II. hubungi kantor teknis castel untuk informasi tentang aplikasi spesifik dengan refrigeran yang tidak tercantum di atas tetapi milik grup II. Tersedia dalam versi NC yang biasanya tertutup dan biasanya terbuka atau tanpa versi, dengan koneksi dari 1/4 ″ hingga 2 1/8 ″ dan berbagai macam gulungan dan konektor.
Rp0,00Selenoid Valve Castel 1/4″
Rp0,00 -
Selenoid Valve Castel 3/4″
Kami menjual Selenoid Valve Castel 3/4″
SELENOID VALVES DESCRIPTION
Solenoid valves are designed for instalation on commercial refrigeration systems and civil and industrial air conditioning systems employing the following refrigerants : R22, R134A, R404A, R407C, 410A, R507 in group II . contact castel’s technical office for information on specific applications with refrigerant which are not listed above but do belong to group II . Available in normally closed org NC and normally open or no versions, with connections from 13/4/4″ to 2 1/8″ and vast range of reels and connectors .
Katup solenoid dirancang untuk pemasangan pada sistem pendingin komersial dan sistem pendingin udara sipil dan industri yang menggunakan pendingin berikut: R22, R134A, R404A, R407C, 410A, R507 dalam kelompok II. hubungi kantor teknis castel untuk informasi tentang aplikasi spesifik dengan refrigeran yang tidak tercantum di atas tetapi milik grup II. Tersedia dalam versi NC yang biasanya tertutup dan biasanya terbuka atau tanpa versi, dengan koneksi dari 13/4/4 ″ hingga 2 1/8 ″ dan berbagai pilihan gulungan dan konektor.
Rp0,00Selenoid Valve Castel 3/4″
Rp0,00 -
Selenoid Valve Castel 3/8″
Kami menjual Selenoid Valve Castel 3/8″
SELENOID VALVES DESCRIPTION
Solenoid valves are designed for instalation on commercial refrigeration systems and civil and industrial air conditioning systems employing the following refrigerants : R22, R134A, R404A, R407C, 410A, R507 in group II . contact castel’s technical office for information on specific applications with refrigerant which are not listed above but do belong to group II . Available in normally closed org NC and normally open or no versions, with connections from 1/4″ to 2 1/8″ and vast range of reels and connectors .
Katup solenoid dirancang untuk pemasangan pada sistem pendingin komersial dan sistem pendingin udara sipil dan industri yang menggunakan pendingin berikut: R22, R134A, R404A, R407C, 410A, R507 dalam kelompok II. hubungi kantor teknis castel untuk informasi tentang aplikasi spesifik dengan refrigeran yang tidak tercantum di atas tetapi milik grup II. Tersedia dalam versi NC yang biasanya tertutup dan biasanya terbuka atau tanpa versi, dengan koneksi dari 1/4 ″ hingga 2 1/8 ″ dan berbagai macam gulungan dan konektor.
Rp0,00Selenoid Valve Castel 3/8″
Rp0,00 -
Selenoid Valve Castel 5/8″
SELENOID VALVES DESCRIPTION
Solenoid valves are designed for instalation on commercial refrigeration systems and civil and industrial air conditioning systems employing the following refrigerants : R22, R134A, R404A, R407C, 410A, R507 in group II . contact castel’s technical office for information on specific applications with refrigerant which are not listed above but do belong to group II . Available in normally closed org NC and normally open or no versions, with connections from 1/4″ to 2 1/8″ and vast range of reels and connectors .
Rp0,00Selenoid Valve Castel 5/8″
Rp0,00 -
Steam Handen 20A
Kami menjual Steam Handen 20A
Specification :
Motor Kapasitas: 200 Watt | Tekanan: 50 Psi / 700 Kg / Cm | Discharge: 2.9/3.5 L / Min | Rpm: 1430 Rpm | Berat: 9 Kg
Rp0,00Steam Handen 20A
Rp0,00 -
Suction Accumulator Blue Green 1 1/8″
Kami menjual Suction Accumulator Blue Green BLR/AAS-5139 ∅ 127 1 1/8″ ODS 3.5L
Specification :
BLR/AAS SUCTION LINE ACCUMULATORS Refrigeration
Desain akumulator tabung BLUE U adalah hasil dari pengujian laboratorium yang luas ditambah investigasi terperinci dari berbagai akumulator yang saat ini tersedia. Ini memperhitungkan semua persyaratan penting untuk aplikasi pompa panas, termasuk volume penyimpanan yang aman (relatif terhadap total muatan sistem), kontrol aliran yang dilindungi untuk refrigeran dan pengembalian oli yang positif, dan penurunan tekanan minimum di akumulator. BLUE menawarkan model akumulator standar yang dirancang untuk aplikasi pada pompa panas dan sistem pendingin mulai 1 1/2 hingga 12 ton. Persyaratan holding pendingin cair dari penghisap hisap dapat berbeda menurut aplikasi. Karena keragaman dalam sistem pompa panas, pemilihan kapasitas akumulator harus ditentukan dengan pengujian yang sebenarnya. Konsultasikan BIRU untuk bantuan jika diperlukan.
Rp0,00 -
Suction Accumulator Blue Green 1 3/8″
Kami menjual Suction Accumulator Blue Green BLR/AAS-51711 ∅ 127 1 3/8″ ODS 4.7L
Specification :
BLR/AAS SUCTION LINE ACCUMULATORS Refrigeration
Desain akumulator tabung BLUE U adalah hasil dari pengujian laboratorium yang luas ditambah investigasi terperinci dari berbagai akumulator yang saat ini tersedia. Ini memperhitungkan semua persyaratan penting untuk aplikasi pompa panas, termasuk volume penyimpanan yang aman (relatif terhadap total muatan sistem), kontrol aliran yang dilindungi untuk refrigeran dan pengembalian oli yang positif, dan penurunan tekanan minimum di akumulator. BLUE menawarkan model akumulator standar yang dirancang untuk aplikasi pada pompa panas dan sistem pendingin mulai 1 1/2 hingga 12 ton. Persyaratan holding pendingin cair dari penghisap hisap dapat berbeda menurut aplikasi. Karena keragaman dalam sistem pompa panas, pemilihan kapasitas akumulator harus ditentukan dengan pengujian yang sebenarnya. Konsultasikan BIRU untuk bantuan jika diperlukan.
Rp0,00