-
1 × Rp0,00 -
7 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00 -
4 × Rp0,00 -
4 × Rp0,00
-
1 × Rp0,00 -
2 × Rp0,00
-
4 × Rp0,00
-
1 × Rp0,00 -
4 × Rp0,00 -
1 × Rp0,00 -
2 × Rp0,00
-
1 × Rp0,00
-
2 × Rp0,00 -
2 × Rp0,00
-
5 × Rp0,00 -
3 × Rp0,00
-
1 × Rp0,00 -
2 × Rp0,00
-
1 × Rp0,00
-
3 × Rp0,00 -
3 × Rp0,00 -
2 × Rp0,00 -
2 × Rp0,00 -
3 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00
-
1 × Rp0,00 -
1 × Rp0,00
-
2 × Rp0,00
-
2 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00
-
1 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00
-
2 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00
-
1 × Rp0,00
-
1 × Rp0,00 -
1 × Rp0,00
-
2 × Rp0,00
-
-
1 × Rp0,00
-
1 × Rp0,00
-
2 × Rp0,00 -
2 × Rp0,00
-
1 × Rp0,00
-
1 × Rp0,00
-
1 × Rp0,00
-
1 × Rp0,00
-
1 × Rp0,00 -
1 × Rp0,00 -
1 × Rp0,00
Best Seller Items
-
Compressor Manuerop Danfoss MT 64-4VM
Kami menjual Compressor Manuerop Danfoss MT 64-4VM
-
Pipa Set 1/4×5/8x30M HD Inverter
Kami menjual Pipa Set 2-2.5HP 1/4×5/8x30M HD Inverter
Rp0,00 -
Pipa Tembaga Roll 3/16″ HD
Kami menjual 3/16” hd (4.76mm) x0.76mmx15m
Rp0,00Pipa Tembaga Roll 3/16″ HD
Rp0,00 -
Oil Emkarate RL 100 H ( 5 LTR )
Kami menjual Oil Emkarate RL 100 H ( 5 LTR )
The Emkarate family of lubricants is a wide range of polyol ester refrigeration oil products. They are designed specifically for use with HFC refrigerants, developed to meet the performance demands of the refrigeration industry. This superior performance is achieved with basefluids that are specifically formulated to deliver optimum performance with minimal additive levels.
The requirements of today’s refrigeration and air conditioning compressor lubricants are complex. They must be compatible and miscible with the HFC refrigerants, and they must be compatible and miscible with CFC’s and HCFC’s as well as mineral and alkylbenzene oils. Polyol ester lubricants meet these needs, and the EMKARATE RL line is the preferred choice. Working in close collaboration with compressor and system manufacturers, these OEM-approved POE lubricants cover a wide viscosity range from 7 cSt (35-40 SUS) to 220 cSt (1100 SUS) to suit most applications. The lubricants have excellent thermal and chemical stability, and are compatible with a wide range of elastomers, polymeric materials and other materials of construction. Additionally, then higher viscosity index is an indication that their effective viscosity will not change drastically with the wide swings in temperature seen by most typical refrigeration and air conditioning systems. They are the preferred choice for servicing and retrofitting existing equipment as well as for OEM charging.
Rp0,00 -
Filter Drier Danfoss DML 304
Kami menjual Filter Drier Danfoss DML 304
DML ELMINATOR hermetic filter driers protect refrigeration and air conditioning systems from moisture, acids and solid particles, eleminating harmful chemical reaction and abrasive impurities . DML hermetic filter driers, with a 100% solid molecular sieve core, are recommended for use with HFO, HC, HFC and HCFC refrigerants . They are hermetic and available in many sizes and connection types .
APPLICATIONS
- Traditional refrigeration
- Air Conditioning units
- Transport Refrigeration
- High Drying capacity avoiding the risk of acid formation in the refrigeration system
- All danfoss filter driers have end caps designed for greater protection and easy removal
- Wide range with size : 1.5-75 cubic inches
- Corrosion resistant powder-painted finish, tested for 500 hrs in salt spray
- 100% 3A molecular sieve core
- Recommended for use with HFO, HC, HFC, and HCFC refrigerants ( face seal connectors for HFO refrigerants available upon request,please contact your sales representative )
- PS/MWP up to 46 bar/667 psig
- Available with flare, solder ( pure cooper, cu-plated ) connections .
Rp0,00Filter Drier Danfoss DML 304
Rp0,00 -
Filter Drier Danfoss DML 305
Kami menjual Filter Drier Danfoss DML 305
DML ELMINATOR hermetic filter driers protect refrigeration and air conditioning systems from moisture, acids and solid particles, eleminating harmful chemical reaction and abrasive impurities . DML hermetic filter driers, with a 100% solid molecular sieve core, are recommended for use with HFO, HC, HFC and HCFC refrigerants . They are hermetic and available in many sizes and connection types .
APPLICATIONS
- Traditional refrigeration
- Air Conditioning units
- Transport Refrigeration
- High Drying capacity avoiding the risk of acid formation in the refrigeration system
- All danfoss filter driers have end caps designed for greater protection and easy removal
- Wide range with size : 1.5-75 cubic inches
- Corrosion resistant powder-painted finish, tested for 500 hrs in salt spray
- 100% 3A molecular sieve core
- Recommended for use with HFO, HC, HFC, and HCFC refrigerants ( face seal connectors for HFO refrigerants available upon request,please contact your sales representative )
- PS/MWP up to 46 bar/667 psig
- Available with flare, solder ( pure cooper, cu-plated ) connections .
Rp0,00Filter Drier Danfoss DML 305
Rp0,00
-
Ball Valve Danfoss GBC 16S 5/8″
Katup bola GBC dioperasikan secara manual katup penutup yang cocok untuk aplikasi di mana aliran dua arah merupakan persyaratan.
Katup GBC disetujui untuk aplikasi dalam saluran cairan, hisap, dan gas panas dalam sistem pendingin dan pendingin udara.
Katup GBC menawarkan keketatan maksimum di kursi dan segel, dengan penurunan tekanan minimum.
Katup GBC memberikan aliran maksimum dalam posisi terbuka penuh. Mereka dirancang untuk operasi dalam kisaran suhu yang luas dan disetujui untuk digunakan dengan refrigeran berfluorinasi. Katup GBC standar dapat digunakan dalam aplikasi yang menggunakan pendingin bertekanan tinggi, termasuk R410A, dan katup bola dua arah GBC dapat dikirimkan dengan atau tanpa port akses eksternal.
Untuk aplikasi CO2, rentang khusus tersedia dengan maks. tekanan kerja 90 bar (1300 psig).
Katup GBC dilengkapi dengan penutup segel satu bagian untuk mencegah gangguan. Sesuai dengan European Safety Directive EN 378 (Persyaratan keselamatan dan lingkungan).Rp0,00 -
Ball Valve Danfoss GBC 18S 3/4″
Katup bola GBC dioperasikan secara manual katup penutup yang cocok untuk aplikasi di mana aliran dua arah merupakan persyaratan.
Katup GBC disetujui untuk aplikasi dalam saluran cairan, hisap, dan gas panas dalam sistem pendingin dan pendingin udara.
Katup GBC menawarkan keketatan maksimum di kursi dan segel, dengan penurunan tekanan minimum.
Katup GBC memberikan aliran maksimum dalam posisi terbuka penuh. Mereka dirancang untuk operasi dalam kisaran suhu yang luas dan disetujui untuk digunakan dengan refrigeran berfluorinasi. Katup GBC standar dapat digunakan dalam aplikasi yang menggunakan pendingin bertekanan tinggi, termasuk R410A, dan katup bola dua arah GBC dapat dikirimkan dengan atau tanpa port akses eksternal.
Untuk aplikasi CO2, rentang khusus tersedia dengan maks. tekanan kerja 90 bar (1300 psig).
Katup GBC dilengkapi dengan penutup segel satu bagian untuk mencegah gangguan. Sesuai dengan European Safety Directive EN 378 (Persyaratan keselamatan dan lingkungan).Rp0,00 -
Ball Valve Danfoss GBC 22S 7/8″
Kami menjual Ball Valve Danfoss GBC 22S 7/8″
GBC ball valves are manually operated shut-off valves suitable for applications where bi-directional flow is a requirement.
GBC valves are approved for applications in liquid, suction, and hot gas lines in refrigeration and air conditioning systems.
GBC valves offer maximum tightness across the seat and seal, with minimum pressure drop.
GBC valves give maximum flow in the fully open position. They are designed for operation within a broad temperature range and are approved for use with any fluorinated refrigerant. Standard GBC valves may be used in applications using high pressure refrigerants, including R410A, and GBC bi-directional ball valves can be delivered with or without external access port.
For CO2 applications a dedicated range is available with a max. working pressure of 90 bar (1300 psig).
GBC valves are equipped with a one-piece seal cap to prevent tampering. Complies with European Safety Directive EN 378 (Safety and environmental requirements).Rp0,00 -
Ball Valve Danfoss GBC 28S 1 1/8″
Kami menjual Ball Valve Danfoss GBC 28S 1 1/8″
GBC ball valves are manually operated shut-off valves suitable for applications where bi-directional flow is a requirement.
GBC valves are approved for applications in liquid, suction, and hot gas lines in refrigeration and air conditioning systems.
GBC valves offer maximum tightness across the seat and seal, with minimum pressure drop.
GBC valves give maximum flow in the fully open position. They are designed for operation within a broad temperature range and are approved for use with any fluorinated refrigerant. Standard GBC valves may be used in applications using high pressure refrigerants, including R410A, and GBC bi-directional ball valves can be delivered with or without external access port.
For CO2 applications a dedicated range is available with a max. working pressure of 90 bar (1300 psig).
GBC valves are equipped with a one-piece seal cap to prevent tampering. Complies with European Safety Directive EN 378 (Safety and environmental requirements).Rp0,00 -
Ball Valve Danfoss GBC 6S 1/4″
Kami menjual Ball Valve Danfoss GBC 6S 1/4″
GBC ball valves are manually operated shut-off valves suitable for applications where bi-directional flow is a requirement.
GBC valves are approved for applications in liquid, suction, and hot gas lines in refrigeration and air conditioning systems.
GBC valves offer maximum tightness across the seat and seal, with minimum pressure drop.
GBC valves give maximum flow in the fully open position. They are designed for operation within a broad temperature range and are approved for use with any fluorinated refrigerant. Standard GBC valves may be used in applications using high pressure refrigerants, including R410A, and GBC bi-directional ball valves can be delivered with or without external access port.
For CO2 applications a dedicated range is available with a max. working pressure of 90 bar (1300 psig).
GBC valves are equipped with a one-piece seal cap to prevent tampering. Complies with European Safety Directive EN 378 (Safety and environmental requirements).Rp0,00 -
Bearing Bush Bitzer 4H.2 4G.2 6G.2 6F.2 ART 311100-08
Bitzer bearing bush ART 311100-08 dengan spesifikasi sebagai berikut.
Untuk compressor 4H.2, 4G.2, 6G.2, 6F.2, 6F-50.2.
Ukuran diameter luar 75mm x diameter dalam 70mm x panjang 70mmtipe lainnya :
BEARING BUSH BITZER ART.311100-04 BEARING BUSH BITZER ART.311100-08 BEARING BUSH BITZER ART.311100-09 BEARING BUSH BITZER ART.311100-10 BEARING BUSH BITZER ART.311100-12 BEARING BUSH BITZER ART.311100-13 BEARING BUSH BITZER ART.311100-17 BEARING BUSH BITZER ART.311104-06 BEARING BUSH BITZER ART.311104-07 BEARING BUSH BITZER ART.311104-08 BEARING BUSH BITZER ART.311104-09 BEARING BUSH BITZER ART.311112-15 BEARING BUSH BITZER ART.311112-16 BEARING BUSH BITZER ART.311125-03 BEARING BUSH BITZER ART.311135-01 -
Bracket AC
Bracket / Braket AC, merupakan sparepart yang digunakan untuk menopang out door / suatu unit pendingin pada tembok yang menempel, terbuat dari bahan baku yang berasal dari besi plat.
Ukuran :1/2pk sampai 5 pk
Merk : m&m
-
Check Valve Danfoss NRV 10 3/8″
DESKRIPSI
NRV dan NRVH dapat digunakan dalam saluran gas cair, hisap dan panas di pabrik pendingin dan pendingin udara dengan pendingin berfluorinasi. NRV dan NRVH dapat dilengkapi dengan koneksi suar dan solder. Mereka juga tersedia dengan koneksi solder kebesaran yang memberikan fleksibilitas dalam penggunaan katup periksa.
Rp0,00 -
Check Valve Danfoss NRV 12 1/2″
Kami menjual Check Valve Danfoss NRV 12 1/2″
DESKRIPSI
NRV dan NRVH dapat digunakan dalam saluran gas cair, hisap dan panas di pabrik pendingin dan pendingin udara dengan pendingin berfluorinasi. NRV dan NRVH dapat dilengkapi dengan koneksi suar dan solder. Mereka juga tersedia dengan koneksi solder kebesaran yang memberikan fleksibilitas dalam penggunaan katup periksa.
Rp0,00 -
Check Valve Danfoss NRV 16 5/8″
Kami menjual Check Valve Danfoss NRV 16 5/8″
DESCRIPTION
NRV and NRVH can be used in liquid, suction and hot gas lines in refrigeration and air conditioning plants with fluorinated refrigerants. NRV and NRVH can be supplied with flare and solder connections. They are also available with oversize solder connections providing flexibility in the use of check valves.
Rp0,00 -
Check Valve Danfoss NRV 19 3/4″
Kami menjual Check Valve Danfoss NRV 19 3/4″
DESCRIPTION
NRV and NRVH can be used in liquid, suction and hot gas lines in refrigeration and air conditioning plants with fluorinated refrigerants. NRV and NRVH can be supplied with flare and solder connections. They are also available with oversize solder connections providing flexibility in the use of check valves.
Rp0,00 -
Check Valve Danfoss NRV 6 1/4″
DESCRIPTION
NRV and NRVH can be used in liquid, suction and hot gas lines in refrigeration and air conditioning plants with fluorinated refrigerants. NRV and NRVH can be supplied with flare and solder connections. They are also available with oversize solder connections providing flexibility in the use of check valves.
Rp0,00