Best Seller Items
-
Compressor Manuerop Danfoss MT 64-4VM
Kami menjual Compressor Manuerop Danfoss MT 64-4VM
-
Pipa Set 1/4×5/8x30M HD Inverter
Kami menjual Pipa Set 2-2.5HP 1/4×5/8x30M HD Inverter
Rp0,00 -
Pipa Tembaga Roll 3/16″ HD
Kami menjual 3/16” hd (4.76mm) x0.76mmx15m
Rp0,00Pipa Tembaga Roll 3/16″ HD
Rp0,00 -
Oil Emkarate RL 100 H ( 5 LTR )
Kami menjual Oil Emkarate RL 100 H ( 5 LTR )
The Emkarate family of lubricants is a wide range of polyol ester refrigeration oil products. They are designed specifically for use with HFC refrigerants, developed to meet the performance demands of the refrigeration industry. This superior performance is achieved with basefluids that are specifically formulated to deliver optimum performance with minimal additive levels.
The requirements of today’s refrigeration and air conditioning compressor lubricants are complex. They must be compatible and miscible with the HFC refrigerants, and they must be compatible and miscible with CFC’s and HCFC’s as well as mineral and alkylbenzene oils. Polyol ester lubricants meet these needs, and the EMKARATE RL line is the preferred choice. Working in close collaboration with compressor and system manufacturers, these OEM-approved POE lubricants cover a wide viscosity range from 7 cSt (35-40 SUS) to 220 cSt (1100 SUS) to suit most applications. The lubricants have excellent thermal and chemical stability, and are compatible with a wide range of elastomers, polymeric materials and other materials of construction. Additionally, then higher viscosity index is an indication that their effective viscosity will not change drastically with the wide swings in temperature seen by most typical refrigeration and air conditioning systems. They are the preferred choice for servicing and retrofitting existing equipment as well as for OEM charging.
Rp0,00 -
Filter Drier Danfoss DML 304
Kami menjual Filter Drier Danfoss DML 304
DML ELMINATOR hermetic filter driers protect refrigeration and air conditioning systems from moisture, acids and solid particles, eleminating harmful chemical reaction and abrasive impurities . DML hermetic filter driers, with a 100% solid molecular sieve core, are recommended for use with HFO, HC, HFC and HCFC refrigerants . They are hermetic and available in many sizes and connection types .
APPLICATIONS
- Traditional refrigeration
- Air Conditioning units
- Transport Refrigeration
- High Drying capacity avoiding the risk of acid formation in the refrigeration system
- All danfoss filter driers have end caps designed for greater protection and easy removal
- Wide range with size : 1.5-75 cubic inches
- Corrosion resistant powder-painted finish, tested for 500 hrs in salt spray
- 100% 3A molecular sieve core
- Recommended for use with HFO, HC, HFC, and HCFC refrigerants ( face seal connectors for HFO refrigerants available upon request,please contact your sales representative )
- PS/MWP up to 46 bar/667 psig
- Available with flare, solder ( pure cooper, cu-plated ) connections .
Rp0,00Filter Drier Danfoss DML 304
Rp0,00 -
Filter Drier Danfoss DML 305
Kami menjual Filter Drier Danfoss DML 305
DML ELMINATOR hermetic filter driers protect refrigeration and air conditioning systems from moisture, acids and solid particles, eleminating harmful chemical reaction and abrasive impurities . DML hermetic filter driers, with a 100% solid molecular sieve core, are recommended for use with HFO, HC, HFC and HCFC refrigerants . They are hermetic and available in many sizes and connection types .
APPLICATIONS
- Traditional refrigeration
- Air Conditioning units
- Transport Refrigeration
- High Drying capacity avoiding the risk of acid formation in the refrigeration system
- All danfoss filter driers have end caps designed for greater protection and easy removal
- Wide range with size : 1.5-75 cubic inches
- Corrosion resistant powder-painted finish, tested for 500 hrs in salt spray
- 100% 3A molecular sieve core
- Recommended for use with HFO, HC, HFC, and HCFC refrigerants ( face seal connectors for HFO refrigerants available upon request,please contact your sales representative )
- PS/MWP up to 46 bar/667 psig
- Available with flare, solder ( pure cooper, cu-plated ) connections .
Rp0,00Filter Drier Danfoss DML 305
Rp0,00
-
Suction Line Accumulator Blue Green 3/4″
Spesifikasi:
BLR / AAS SUCTION LINE ACCUMULATORS Pendinginan
Desain akumulator tabung BLUE U adalah hasil dari pengujian laboratorium yang luas ditambah investigasi terperinci dari berbagai akumulator yang saat ini tersedia. Ini memperhitungkan semua persyaratan penting untuk aplikasi pompa panas, termasuk volume penyimpanan yang aman (relatif terhadap total muatan sistem), kontrol aliran yang dilindungi untuk refrigeran dan pengembalian oli yang positif, dan penurunan tekanan minimum di akumulator. BLUE menawarkan model akumulator standar yang dirancang untuk aplikasi pada pompa panas dan sistem pendingin mulai 1 1/2 hingga 12 ton. Persyaratan holding pendingin cair dari penghisap hisap dapat berbeda menurut aplikasi. Karena keragaman dalam sistem pompa panas, pemilihan kapasitas akumulator harus ditentukan dengan pengujian yang sebenarnya. Konsultasikan BIRU untuk bantuan jika diperlukan.
Rp0,00 -
Suction Line Accumulator Blue Green 5/8″
Spesifikasi:
BLR / AAS SUCTION LINE ACCUMULATORS Pendinginan
Desain akumulator tabung BLUE U adalah hasil dari pengujian laboratorium yang luas ditambah investigasi terperinci dari berbagai akumulator yang saat ini tersedia. Ini memperhitungkan semua persyaratan penting untuk aplikasi pompa panas, termasuk volume penyimpanan yang aman (relatif terhadap total muatan sistem), kontrol aliran yang dilindungi untuk refrigeran dan pengembalian oli yang positif, dan penurunan tekanan minimum di akumulator. BLUE menawarkan model akumulator standar yang dirancang untuk aplikasi pada pompa panas dan sistem pendingin mulai 1 1/2 hingga 12 ton. Persyaratan holding pendingin cair dari penghisap hisap dapat berbeda menurut aplikasi. Karena keragaman dalam sistem pompa panas, pemilihan kapasitas akumulator harus ditentukan dengan pengujian yang sebenarnya. Konsultasikan BIRU untuk bantuan jika diperlukan.
Rp0,00 -
Suction Line Accumulator Blue Green 7/8″
Specification :
BLR/AAS SUCTION LINE ACCUMULATORS Refrigeration
The BLUE U tube accumulator design is a result of extensive laboratory testing plus detailed investigation of the various accumulators currently available. It takes into account all of the requirements essential for heat pump applications, including safe holding volume (relative to the systems total charge), protected flow control for positive refrigerant and oil return, and minimum pressure drop across the accumulator. BLUE offers standard accumulator models designed for application on heat pump and refrigeration systems from 1 1/2 through 12 tons. Liquid refrigerant holding requirements of suction accumulator may vary by application. Because of the diversity in heat pump systems, accumulator capacity selection should be determined by actual testing. Consult BLUE for assistance if required.
Rp0,00