• Oil Emkarate RL 100 H ( 5 LTR )

    Oil Emkarate RL 32H ( 5 LTR )

    Kami menjual Oli Emkarate RL 32H ( 5 LTR )

    PRODUCT DESCRIPTION :

    EMKARATE RL 32 H is an iso VG 32 synthetic polyol ester ( POE ) lubricant formulated specifically for use in refrigerantion and air conditioning compressor using HFC refrigerant . this product provides effective wear protection for steel and alumunium surfaces for increaseed system life and improved efficiency and is suitable for both initial fil and service fill . The combination of low temperature charateristics and unparalleled chemical and thermal stability enable the use of emkarate RL 32 H over a wide operating temperature range .

    Rp0,00
  • Oil Emkarate RL 100 H ( 5 LTR )

    Oil Emkarate RL 46 H ( 5 LTR )

    Kami menjual Oil Emkarate RL 46 H ( 5 LTR )

    pelumas Emkarate adalah beragam produk minyak pendingin poliol ester. Mereka dirancang khusus untuk digunakan dengan pendingin HFC, yang dikembangkan untuk memenuhi tuntutan kinerja industri pendingin. Performa superior ini dicapai dengan cairan dasar yang diformulasikan khusus untuk memberikan kinerja optimal dengan tingkat aditif minimal.

    Persyaratan pelumas kompresor dan pendingin udara saat ini sangat kompleks. Mereka harus kompatibel dan larut dengan refrigeran HFC, dan mereka harus kompatibel dan larut dengan CFC dan HCFC serta minyak mineral dan alkilbenzena. Pelumas poliol ester memenuhi kebutuhan ini, dan lini EMKARATE RL adalah pilihan yang lebih disukai. Bekerja dalam kerja sama erat dengan produsen kompresor dan sistem, pelumas POE yang disetujui oleh OEM ini mencakup rentang viskositas yang luas mulai dari 7 cSt (35-40 SUS) hingga 220 cSt (1100 SUS) yang sesuai dengan sebagian besar aplikasi. Pelumas memiliki stabilitas termal dan kimia yang sangat baik, dan kompatibel dengan berbagai elastomer, bahan polimer dan bahan konstruksi lainnya. Selain itu, indeks viskositas yang lebih tinggi merupakan indikasi bahwa viskositas efektif mereka tidak akan berubah secara drastis dengan perubahan suhu yang lebar yang terlihat oleh kebanyakan sistem pendingin dan pendingin udara. Mereka adalah pilihan yang lebih disukai untuk melakukan servis dan perkuatan peralatan yang ada serta untuk pengisian daya OEM.

    Rp0,00
  • piston set bitzer 302297-40 - Sumber mandiri surabaya

    Piston Bitzer 4G.2 / 6G.2 ART 302297-40

    Bitzer connection rod / piston ART 302297-40 , dengan spesifikasi sebagai berikut.
    – Untuk compressor seri 4G.2, 6G.2
    S4G-12.2Y
    S6G.2

    tipe lainnya :

    PISTON SET/CONROD BITZER ART.302239-04
    PISTON SET/CONROD BITZER ART.302239-05
    PISTON SET/CONROD BITZER ART.302239-06
    PISTON SET/CONROD BITZER ART.302239-07
    PISTON SET/CONROD BITZER ART.302239-08
    PISTON SET/CONROD BITZER ART.302297-24
    PISTON SET/CONROD BITZER ART.302297-31
    PISTON SET/CONROD BITZER ART.302297-40
    PISTON SET/CONROD BITZER ART.302297-43
    PISTON SET/CONROD BITZER ART.302297-46
    PISTON SET/CONROD BITZER ART.302297-65
    PISTON SET/CONROD BITZER ART.302298-46
    PISTON SET/CONROD BITZER ART.302298-47
    PISTON SET/CONROD BITZER ART.302298-48
    PISTON SET/CONROD BITZER ART.302298-49
    PISTON SET/CONROD BITZER ART.302298-67
    PISTON SET/CONROD BITZER ART.302298-68
    PISTON SET/CONROD BITZER ART.302298-69
    PISTON SET/CONROD BITZER ART.302298-70
    PISTON SET/CONROD BITZER ART.302298-71
    PISTON SET/CONROD BITZER ART.302298-72
    PISTON SET/CONROD BITZER ART.302298-73
    PISTON SET/CONROD BITZER ART.302298-74
    PISTON SET/CONROD BITZER ART.302298-75
  • ring piston BITZER 38230039

    Ring Piston Bitzer Type VI – ART 382300-39

    Bitzer Ring Piston Type VI ART 382300-39
    Ukuran diameter 105mm x 2,5mm

    tipe lainnya :

    RING PISTON BITZER ART.382300-99
    RING PISTON BITZER ART.382303-01
    RING PISTON BITZER ART.382303-02
    RING PISTON BITZER ART.382303-03
    RING PISTON BITZER ART.382310-40
    RING PISTON BITZER ART.382310-41
    RING PISTON BITZER ART.382310-42
    RING PISTON BITZER ART.382310-43
  • Selenoid Danfoss EVR 10 5/8″

    Selenoid Danfoss EVR 10 5/8″

    Kami menjual Selenoid Danfoss EVR 10 5/8″

    Product Description

    KP pressure controls are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure. The controls are also used for starting ans stopping refrigeration compressors and fans on air- cooled condensers. KP pressure controls are available in IP 30 and IP 44 enclosures.

    Product Features
    • Ambient temperature:–40 – +65°C (+80°C for max. 2 hours). DIN-approved units:–40 – +65°C (+80°C for max. 2 hours). Max. working pressure = 17 bar Max. test pressure = 20 bar Contact load, AC: AC1: 16 A, 400 V AC3: 16 A, 400 V AC15: 10 A, 400 V Max. starting current (L.R.): 112 A, 400 V Contact load, DC: DC13: 12 W, 220 V control current
    Rp0,00
  • Selenoid Danfoss EVR 10 5/8″

    Selenoid Danfoss EVR 15 7/8″

    Kami menjual Selenoid Danfoss EVR 15 7/8″

    Product Description

    KP pressure controls are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure. The controls are also used for starting ans stopping refrigeration compressors and fans on air- cooled condensers. KP pressure controls are available in IP 30 and IP 44 enclosures.

    Product Features
    • Ambient temperature:–40 – +65°C (+80°C for max. 2 hours). DIN-approved units:–40 – +65°C (+80°C for max. 2 hours). Max. working pressure = 17 bar Max. test pressure = 20 bar Contact load, AC: AC1: 16 A, 400 V AC3: 16 A, 400 V AC15: 10 A, 400 V Max. starting current (L.R.): 112 A, 400 V Contact load, DC: DC13: 12 W, 220 V control current
    Rp0,00
  • Selenoid Danfoss EVR 10 5/8″

    Selenoid Danfoss EVR 2 1/4″

    Kami menjual Selenoid Danfoss EVR 2 1/4″

    Product Description

    EVR (NC) is a normally closed, direct or servo operated solenoid valve for liquid, suction and hot gas lines with fluorinated refrigerants. EVR valves are supplied complete or as separate components, i.e. valve body, coil and flanges.

    Product Features
    • Refrigerants: R22/R407C, R404A/R507, R410A, R134a, R407A, R23. For other refrigerants, please contact Danfoss. Temperature of medium: -40 – +105°C (10 W / 12 W coil) Max. 130°C during defrosting. Min. opening differential pressure, EVR 2-3: 0.0 bar, EVR 6-22: 0.05 bar, EVR 25-32: 0.20 bar.
    Rp0,00
  • Selenoid Danfoss EVR 10 5/8″

    Selenoid Danfoss EVR 3 3/8″

    Kami menjual Selenoid Danfoss EVR 3 3/8″

    Product Description

    EVR (NC) is a normally closed, direct or servo operated solenoid valve for liquid, suction and hot gas lines with fluorinated refrigerants. EVR valves are supplied complete or as separate components, i.e. valve body, coil and flanges.

    Product Features
    • Refrigerants: R22/R407C, R404A/R507, R410A, R134a, R407A, R23. For other refrigerants, please contact Danfoss. Temperature of medium: -40 – +105°C (10 W / 12 W coil) Max. 130°C during defrosting. Min. opening differential pressure, EVR 2-3: 0.0 bar, EVR 6-22: 0.05 bar, EVR 25-32: 0.20 bar.
    Rp0,00
  • Selenoid Danfoss EVR 6 1/2″

    01
    Product Description

    EVR (NC) is a normally closed, direct or servo operated solenoid valve for liquid, suction and hot gas lines with fluorinated refrigerants. EVR valves are supplied complete or as separate components, i.e. valve body, coil and flanges.

    Product Features
    • Refrigerants: R22/R407C, R404A/R507, R410A, R134a, R407A, R23. For other refrigerants, please contact Danfoss. Temperature of medium: -40 – +105°C (10 W / 12 W coil) Max. 130°C during defrosting. Min. opening differential pressure, EVR 2-3: 0.0 bar, EVR 6-22: 0.05 bar, EVR 25-32: 0.20 bar.
    Rp0,00

    Selenoid Danfoss EVR 6 1/2″

    01
    Rp0,00
  • Suction Accumulator Emerson A-AS 1086 1/2″

    Suction Accumulator Emerson A-AS 1086 1/2″

    Kami menjual Suction Accumulator Emerson A-AS 1086 1/2″

    The A-AS protects the compressor  from liquid slugging and is used with CFC, HCFC and HFC refrigerants . It is available for systems through 28 tons nominal capacity .

    FEATURES

    • Designed to operate in a range of + 40oF to -40oF evaporator temperature
    • Fusible Flug on larger diameter units
    • Solid copper conections
    • Corrosion Resistant epoxy Powder paint finnish
    • Inlet deflector direct refrigerant flow to prevent internal spalshing and aid in the collection of refrigerant oil

    SPECIFICATIONS

    • Maximum working pressure : 450 psig
    • Fusible plug temperature : 430oF
    • UL/CUL file number : SA 10225
    Rp0,00
Open chat
Butuh Bantuan?
Selamat datang, perlu bantuan?