Best Seller Items
-
Oil Emkarate 4MO
DESCRIPTION
EMKARATE, RL MO Seriers are formulated from a selection of highly refined naphthenic mineral oil base stocks to provide outstanding performance and long life in today’s refrigeration systems. RL MO Series lubricants are designed to meet OEM requirements for compressor lubrication at extreme operating conditions .
EMKARATE, RL MO Series are chemically and thermally stable for cleaner operating performance, has virtually no wax contant which prevents doposits leading to system restrictions while provinding the required miscibility with HCFC, CFC and low GWP natural refrigerant .
Rp0,00Oil Emkarate 4MO
Rp0,00 -
Low Pressure Gauge Danfoss KP 1 Manual
Product Description
KP pressure controls are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure. The controls are also used for starting ans stopping refrigeration compressors and fans on air- cooled condensers. KP pressure controls are available in IP 30 and IP 44 enclosures.
Product Features
- Ambient temperature:–40 – +65°C (+80°C for max. 2 hours). DIN-approved units:–40 – +65°C (+80°C for max. 2 hours). Max. working pressure = 17 bar Max. test pressure = 20 bar Contact load, AC: AC1: 16 A, 400 V AC3: 16 A, 400 V AC15: 10 A, 400 V Max. starting current (L.R.): 112 A, 400 V Contact load, DC: DC13: 12 W, 220 V control current
Rp0,00 -
Compressor Copeland Scroll ZR48KC-TFD-522
Kami menjual Compressor Copeland Scroll ZR48KC-TFD-522
Compressor Copeland Scroll ZR48KC-TFD-522
HCFC, R-22, Mid Point, 50Hz, 3Phase, 380/420V
Capacity/BTU : 40500-47800
Power/Watt : 3600-2490
Current/Amps : 6.1-5
EER ( BTU/wh ) : 11.2-19.2
Mass Flow ( lbs/hr ) : 595.0-615.0
Sound Power ( dBa ) : 68Ave-73Max
Vibration : 2.0Ave-3.0MaxRp0,00 -
Compressor Manuerop Danfoss MT 64-4VM
Kami menjual Compressor Manuerop Danfoss MT 64-4VM
-
Pipa Tembaga Roll HD 5/16″
Kami menjual Pipa Tembaga Roll HD 5/16” (7.94mm) x0.81mmx15m
Rp0,00Pipa Tembaga Roll HD 5/16″
Rp0,00 -
Pipa Tembaga Roll HD 5/8″
Kami menjual Pipa Tembaga Roll 5/8” (15.88mm) x0.89mmx15m
Rp0,00Pipa Tembaga Roll HD 5/8″
Rp0,00 -
Selenoid Valve Castel 1/2″
Kami menjual Selenoid Valve Castel 1/2″
SELENOID VALVES DESCRIPTION
Solenoid valves are designed for instalation on commercial refrigeration systems and civil and industrial air conditioning systems employing the following refrigerants : R22, R134A, R404A, R407C, 410A, R507 in group II . contact castel’s technical office for information on specific applications with refrigerant which are not listed above but do belong to group II . Available in normally closed org NC and normally open or no versions, with connections from 1/4″ to 2 1/8″ and vast range of reels and connectors .
Katup solenoid dirancang untuk pemasangan pada sistem pendingin komersial dan sistem pendingin udara sipil dan industri yang menggunakan pendingin berikut: R22, R134A, R404A, R407C, 410A, R507 dalam kelompok II. hubungi kantor teknis castel untuk informasi tentang aplikasi spesifik dengan refrigeran yang tidak tercantum di atas tetapi milik grup II. Tersedia dalam versi NC yang biasanya tertutup dan biasanya terbuka atau tanpa versi, dengan koneksi dari 1/4 ″ hingga 2 1/8 ″ dan berbagai macam gulungan dan konektor.
Rp0,00Selenoid Valve Castel 1/2″
Rp0,00 -
Selenoid Valve Castel 1/4″
Kami menjual Selenoid Valve Castel 1/4″
SELENOID VALVES DESCRIPTION
Solenoid valves are designed for instalation on commercial refrigeration systems and civil and industrial air conditioning systems employing the following refrigerants : R22, R134A, R404A, R407C, 410A, R507 in group II . contact castel’s technical office for information on specific applications with refrigerant which are not listed above but do belong to group II . Available in normally closed org NC and normally open or no versions, with connections from 1/4″ to 2 1/8″ and vast range of reels and connectors .
Katup solenoid dirancang untuk pemasangan pada sistem pendingin komersial dan sistem pendingin udara sipil dan industri yang menggunakan pendingin berikut: R22, R134A, R404A, R407C, 410A, R507 dalam kelompok II. hubungi kantor teknis castel untuk informasi tentang aplikasi spesifik dengan refrigeran yang tidak tercantum di atas tetapi milik grup II. Tersedia dalam versi NC yang biasanya tertutup dan biasanya terbuka atau tanpa versi, dengan koneksi dari 1/4 ″ hingga 2 1/8 ″ dan berbagai macam gulungan dan konektor.
Rp0,00Selenoid Valve Castel 1/4″
Rp0,00 -
Selenoid Valve Castel 3/4″
Kami menjual Selenoid Valve Castel 3/4″
SELENOID VALVES DESCRIPTION
Solenoid valves are designed for instalation on commercial refrigeration systems and civil and industrial air conditioning systems employing the following refrigerants : R22, R134A, R404A, R407C, 410A, R507 in group II . contact castel’s technical office for information on specific applications with refrigerant which are not listed above but do belong to group II . Available in normally closed org NC and normally open or no versions, with connections from 13/4/4″ to 2 1/8″ and vast range of reels and connectors .
Katup solenoid dirancang untuk pemasangan pada sistem pendingin komersial dan sistem pendingin udara sipil dan industri yang menggunakan pendingin berikut: R22, R134A, R404A, R407C, 410A, R507 dalam kelompok II. hubungi kantor teknis castel untuk informasi tentang aplikasi spesifik dengan refrigeran yang tidak tercantum di atas tetapi milik grup II. Tersedia dalam versi NC yang biasanya tertutup dan biasanya terbuka atau tanpa versi, dengan koneksi dari 13/4/4 ″ hingga 2 1/8 ″ dan berbagai pilihan gulungan dan konektor.
Rp0,00Selenoid Valve Castel 3/4″
Rp0,00 -
Selenoid Valve Castel 3/8″
Kami menjual Selenoid Valve Castel 3/8″
SELENOID VALVES DESCRIPTION
Solenoid valves are designed for instalation on commercial refrigeration systems and civil and industrial air conditioning systems employing the following refrigerants : R22, R134A, R404A, R407C, 410A, R507 in group II . contact castel’s technical office for information on specific applications with refrigerant which are not listed above but do belong to group II . Available in normally closed org NC and normally open or no versions, with connections from 1/4″ to 2 1/8″ and vast range of reels and connectors .
Katup solenoid dirancang untuk pemasangan pada sistem pendingin komersial dan sistem pendingin udara sipil dan industri yang menggunakan pendingin berikut: R22, R134A, R404A, R407C, 410A, R507 dalam kelompok II. hubungi kantor teknis castel untuk informasi tentang aplikasi spesifik dengan refrigeran yang tidak tercantum di atas tetapi milik grup II. Tersedia dalam versi NC yang biasanya tertutup dan biasanya terbuka atau tanpa versi, dengan koneksi dari 1/4 ″ hingga 2 1/8 ″ dan berbagai macam gulungan dan konektor.
Rp0,00Selenoid Valve Castel 3/8″
Rp0,00 -
Suction Accumulator Emerson A-AS 1086-11 3/4″
Kami menjual Suction Accumulator A-AS 1086-11 3/4″
The A-AS protects the compressor from liquid slugging and is used with CFC, HCFC and HFC refrigerants . It is available for systems through 28 tons nominal capacity .
FEATURES
- Designed to operate in a range of + 40oF to -40oF evaporator temperature
- Fusible Flug on larger diameter units
- Solid copper conections
- Corrosion Resistant epoxy Powder paint finnish
- Inlet deflector direct refrigerant flow to prevent internal spalshing and aid in the collection of refrigerant oil
SPECIFICATIONS
- Maximum working pressure : 450 psig
- Fusible plug temperature : 430oF
- UL/CUL file number : SA 10225
Rp0,00 -
Suction Accumulator Emerson A-AS 1086-13 7/8″
A-AS melindungi kompresor dari slugging cair dan digunakan dengan pendingin CFC, HCFC, dan HFC. Ini tersedia untuk sistem melalui kapasitas nominal 28 ton.
FITUR
Dirancang untuk beroperasi dalam kisaran + 40oF hingga -40oF suhu evaporator
Fusible Flug pada unit berdiameter lebih besar
Koneksi tembaga padat
Cat epoksi Tahan Korosi cat finnish
Deflektor inlet mengalirkan aliran refrigeran langsung untuk mencegah spalshing internal dan membantu pengumpulan minyak refrigeran
SPESIFIKASITekanan kerja maksimum: 450 psig
Suhu steker yang dapat melebur: 430oF
Nomor file UL / CUL: SA 10225Rp0,00 -
Suction Accumulator Emerson A-AS 1086-17 1 1/8″
Kami menjual Suction Accumulator Emerson A-AS 1086-17 1 1/8 ″
A-AS melindungi kompresor dari slugging cair dan digunakan dengan pendingin CFC, HCFC, dan HFC. Ini tersedia untuk sistem melalui kapasitas nominal 28 ton.
FITUR
Dirancang untuk beroperasi dalam kisaran + 40oF hingga -40oF suhu evaporator
Fusible Flug pada unit berdiameter lebih besar
Koneksi tembaga padat
Cat epoksi Tahan Korosi cat finnish
Deflektor inlet mengalirkan aliran refrigeran langsung untuk mencegah spalshing internal dan membantu pengumpulan minyak refrigeranSPESIFIKASI
Tekanan kerja maksimum: 450 psig
Suhu steker yang dapat melebur: 430oF
Nomor file UL / CUL: SA 10225Rp0,00 -
Suction Accumulator Emerson A-AS 1086-23 1 3/8″
The A-AS protects the compressor from liquid slugging and is used with CFC, HCFC and HFC refrigerants . It is available for systems through 28 tons nominal capacity .
FEATURES
- Designed to operate in a range of + 40oF to -40oF evaporator temperature
- Fusible Flug on larger diameter units
- Solid copper conections
- Corrosion Resistant epoxy Powder paint finnish
- Inlet deflector direct refrigerant flow to prevent internal spalshing and aid in the collection of refrigerant oil
SPECIFICATIONS
- Maximum working pressure : 450 psig
- Fusible plug temperature : 430oF
- UL/CUL file number : SA 10225
Rp0,00 -
Suction Accumulator Emerson A-AS 1086-26 1 5/8″
The A-AS protects the compressor from liquid slugging and is used with CFC, HCFC and HFC refrigerants . It is available for systems through 28 tons nominal capacity .
FEATURES
- Designed to operate in a range of + 40oF to -40oF evaporator temperature
- Fusible Flug on larger diameter units
- Solid copper conections
- Corrosion Resistant epoxy Powder paint finnish
- Inlet deflector direct refrigerant flow to prevent internal spalshing and aid in the collection of refrigerant oil
SPECIFICATIONS
- Maximum working pressure : 450 psig
- Fusible plug temperature : 430oF
- UL/CUL file number : SA 10225
Rp0,00 -
Suction Accumulator Emerson A-AS 1086-9 5/8″
The A-AS protects the compressor from liquid slugging and is used with CFC, HCFC and HFC refrigerants . It is available for systems through 28 tons nominal capacity .
FEATURES
- Designed to operate in a range of + 40oF to -40oF evaporator temperature
- Fusible Flug on larger diameter units
- Solid copper conections
- Corrosion Resistant epoxy Powder paint finnish
- Inlet deflector direct refrigerant flow to prevent internal spalshing and aid in the collection of refrigerant oil
SPECIFICATIONS
- Maximum working pressure : 450 psig
- Fusible plug temperature : 430oF
- UL/CUL file number : SA 10225
Rp0,00