Best Seller Items
-
Compressor Manuerop Danfoss MT 64-4VM
Kami menjual Compressor Manuerop Danfoss MT 64-4VM
-
Pipa Set 1/4×5/8x30M HD Inverter
Kami menjual Pipa Set 2-2.5HP 1/4×5/8x30M HD Inverter
Rp0,00 -
Pipa Tembaga Roll 3/16″ HD
Kami menjual 3/16” hd (4.76mm) x0.76mmx15m
Rp0,00Pipa Tembaga Roll 3/16″ HD
Rp0,00 -
Oil Emkarate RL 100 H ( 5 LTR )
Kami menjual Oil Emkarate RL 100 H ( 5 LTR )
The Emkarate family of lubricants is a wide range of polyol ester refrigeration oil products. They are designed specifically for use with HFC refrigerants, developed to meet the performance demands of the refrigeration industry. This superior performance is achieved with basefluids that are specifically formulated to deliver optimum performance with minimal additive levels.
The requirements of today’s refrigeration and air conditioning compressor lubricants are complex. They must be compatible and miscible with the HFC refrigerants, and they must be compatible and miscible with CFC’s and HCFC’s as well as mineral and alkylbenzene oils. Polyol ester lubricants meet these needs, and the EMKARATE RL line is the preferred choice. Working in close collaboration with compressor and system manufacturers, these OEM-approved POE lubricants cover a wide viscosity range from 7 cSt (35-40 SUS) to 220 cSt (1100 SUS) to suit most applications. The lubricants have excellent thermal and chemical stability, and are compatible with a wide range of elastomers, polymeric materials and other materials of construction. Additionally, then higher viscosity index is an indication that their effective viscosity will not change drastically with the wide swings in temperature seen by most typical refrigeration and air conditioning systems. They are the preferred choice for servicing and retrofitting existing equipment as well as for OEM charging.
Rp0,00 -
Filter Drier Danfoss DML 304
Kami menjual Filter Drier Danfoss DML 304
DML ELMINATOR hermetic filter driers protect refrigeration and air conditioning systems from moisture, acids and solid particles, eleminating harmful chemical reaction and abrasive impurities . DML hermetic filter driers, with a 100% solid molecular sieve core, are recommended for use with HFO, HC, HFC and HCFC refrigerants . They are hermetic and available in many sizes and connection types .
APPLICATIONS
- Traditional refrigeration
- Air Conditioning units
- Transport Refrigeration
- High Drying capacity avoiding the risk of acid formation in the refrigeration system
- All danfoss filter driers have end caps designed for greater protection and easy removal
- Wide range with size : 1.5-75 cubic inches
- Corrosion resistant powder-painted finish, tested for 500 hrs in salt spray
- 100% 3A molecular sieve core
- Recommended for use with HFO, HC, HFC, and HCFC refrigerants ( face seal connectors for HFO refrigerants available upon request,please contact your sales representative )
- PS/MWP up to 46 bar/667 psig
- Available with flare, solder ( pure cooper, cu-plated ) connections .
Rp0,00Filter Drier Danfoss DML 304
Rp0,00 -
Filter Drier Danfoss DML 305
Kami menjual Filter Drier Danfoss DML 305
DML ELMINATOR hermetic filter driers protect refrigeration and air conditioning systems from moisture, acids and solid particles, eleminating harmful chemical reaction and abrasive impurities . DML hermetic filter driers, with a 100% solid molecular sieve core, are recommended for use with HFO, HC, HFC and HCFC refrigerants . They are hermetic and available in many sizes and connection types .
APPLICATIONS
- Traditional refrigeration
- Air Conditioning units
- Transport Refrigeration
- High Drying capacity avoiding the risk of acid formation in the refrigeration system
- All danfoss filter driers have end caps designed for greater protection and easy removal
- Wide range with size : 1.5-75 cubic inches
- Corrosion resistant powder-painted finish, tested for 500 hrs in salt spray
- 100% 3A molecular sieve core
- Recommended for use with HFO, HC, HFC, and HCFC refrigerants ( face seal connectors for HFO refrigerants available upon request,please contact your sales representative )
- PS/MWP up to 46 bar/667 psig
- Available with flare, solder ( pure cooper, cu-plated ) connections .
Rp0,00Filter Drier Danfoss DML 305
Rp0,00
-
Aluminium Tape
aluminium tape memiliki banyak kegunaan dalam bidang pendingin, dibidang listrik dan dibidang industri . aluminium tape merupakan tape atau pita yang dapat digunakan dalam pekerjaan yang membutuhkan kelembapan dan ketahanan kimia.
Jenis : lem, non lem, metalizing, alumunium tape,insulation tape.
Merk : toyo, superlon, supermax, dll
-
Ball Valve Castel 1 1/8″
Kami menjual Ball Valve Castel 1 1/8″
DESCRIPTION
Ball Valves 6570/6571 yang baru dirancang untuk pemasangan pada sistem pendingin komersial dan pada pabrik pendingin sipil dan industri, yang menggunakan cairan pendingin berikut: R22, R134a, R404A, R407C, R410A, R507 yang sesuai untuk kelompok II.Ball valves tersedia dalam dua jenis berikut:* Tipe 6570 (port penuh) dan tipe 6571 (port dikurangi) tanpa akses pas.* Tipe 6570 / A (port penuh) dengan akses pas, katup bola ini dilengkapi dengan inti katup 8394 / A dan mur mur 7020/20.Rp0,00Ball Valve Castel 1 1/8″
Rp0,00 -
Ball Valve Castel 1 3/8″
DESCRIPTION
Ball Valves 6570/6571 yang baru dirancang untuk pemasangan pada sistem pendingin komersial dan pada pabrik pendingin sipil dan industri, yang menggunakan cairan pendingin berikut: R22, R134a, R404A, R407C, R410A, R507 yang sesuai untuk kelompok II.Ball valves tersedia dalam dua jenis berikut:* Tipe 6570 (port penuh) dan tipe 6571 (port dikurangi) tanpa akses pas.* Tipe 6570 / A (port penuh) dengan akses pas, katup bola ini dilengkapi dengan inti katup 8394 / A dan mur mur 7020/20.Rp0,00Ball Valve Castel 1 3/8″
Rp0,00 -
Ball Valve Castel 1 5/8″
DESCRIPTION
Ball Valves 6570/6571 yang baru dirancang untuk pemasangan pada sistem pendingin komersial dan pada pabrik pendingin sipil dan industri, yang menggunakan cairan pendingin berikut: R22, R134a, R404A, R407C, R410A, R507 yang sesuai untuk kelompok II.Ball valves tersedia dalam dua jenis berikut:* Tipe 6570 (port penuh) dan tipe 6571 (port dikurangi) tanpa akses pas.* Tipe 6570 / A (port penuh) dengan akses pas, katup bola ini dilengkapi dengan inti katup 8394 / A dan mur mur 7020/20.Rp0,00Ball Valve Castel 1 5/8″
Rp0,00 -
Ball Valve Castel 1/2″
Kami menjual Ball Valve Castel 1/2″
DESCRIPTION
The new Ball Valves 6570/6571 are designed for installation on commercial refrigerating systems and on civil and industrial conditioning plants, which use the following refrigerant fluids: R22, R134a, R404A, R407C, R410A, R507 proper to the group II.
Ball valves are available in the following two types:
- Type 6570 (full port) and type 6571 (reduced port) without access fitting.
- Type 6570/A (full port) with access fitting, These ball valves are equipped with valve core 8394/A and blind nut 7020/20.
———————————————–Ball Valves 6570/6571 yang baru dirancang untuk pemasangan pada sistem pendingin komersial dan pada pabrik pendingin sipil dan industri, yang menggunakan cairan pendingin berikut: R22, R134a, R404A, R407C, R410A, R507 yang sesuai untuk kelompok II.Ball valves tersedia dalam dua jenis berikut:* Tipe 6570 (port penuh) dan tipe 6571 (port dikurangi) tanpa akses pas.* Tipe 6570 / A (port penuh) dengan akses pas, katup bola ini dilengkapi dengan inti katup 8394 / A dan mur mur 7020/20.Rp0,00Ball Valve Castel 1/2″
Rp0,00 -
Ball Valve Castel 1/4″
Kami menjual Ball Valve Castel 3/8″
DESCRIPTION
The new Ball Valves 6570/6571 are designed for installation on commercial refrigerating systems and on civil and industrial conditioning plants, which use the following refrigerant fluids: R22, R134a, R404A, R407C, R410A, R507 proper to the group II.
Ball valves are available in the following two types:
*Type 6570 (full port) and type 6571 (reduced port) without access fitting.
*Type 6570/A (full port) with access fitting, These ball valves are equipped with valve core 8394/A and blind nut 7020/20.
——————————————————————————————————-Ball Valves 6570/6571 yang baru dirancang untuk pemasangan pada sistem pendingin komersial dan pada pabrik pendingin sipil dan industri, yang menggunakan cairan pendingin berikut: R22, R134a, R404A, R407C, R410A, R507 yang sesuai untuk kelompok II.
Ball valves tersedia dalam dua jenis berikut:
* Tipe 6570 (port penuh) dan tipe 6571 (port dikurangi) tanpa akses pas.
* Tipe 6570 / A (port penuh) dengan akses pas, katup bola ini dilengkapi dengan inti katup 8394 / A dan mur mur 7020/20.Rp0,00Ball Valve Castel 1/4″
Rp0,00 -
Ball Valve Castel 3/4″
DESCRIPTION
The new Ball Valves 6570/6571 are designed for installation on commercial refrigerating systems and on civil and industrial conditioning plants, which use the following refrigerant fluids: R22, R134a, R404A, R407C, R410A, R507 proper to the group II.
Ball valves are available in the following two types:
- Type 6570 (full port) and type 6571 (reduced port) without access fitting.
- Type 6570/A (full port) with access fitting, These ball valves are equipped with valve core 8394/A and blind nut 7020/20.
Rp0,00Ball Valve Castel 3/4″
Rp0,00 -
Ball Valve Castel 3/8″
Kami menjual Ball Valve Castel 3/8″
DESCRIPTION
The new Ball Valves 6570/6571 are designed for installation on commercial refrigerating systems and on civil and industrial conditioning plants, which use the following refrigerant fluids: R22, R134a, R404A, R407C, R410A, R507 proper to the group II.
Ball valves are available in the following two types:
- Type 6570 (full port) and type 6571 (reduced port) without access fitting.
- Type 6570/A (full port) with access fitting, These ball valves are equipped with valve core 8394/A and blind nut 7020/20.
Ball Valves 6570/6571 yang baru dirancang untuk pemasangan pada sistem pendingin komersial dan pada pabrik pendingin sipil dan industri, yang menggunakan cairan pendingin berikut: R22, R134a, R404A, R407C, R410A, R507 yang sesuai untuk kelompok II.Ball valves tersedia dalam dua jenis berikut:* Tipe 6570 (port penuh) dan tipe 6571 (port dikurangi) tanpa akses pas.* Tipe 6570 / A (port penuh) dengan akses pas, katup bola ini dilengkapi dengan inti katup 8394 / A dan mur mur 7020/20.Rp0,00Ball Valve Castel 3/8″
Rp0,00 -
Ball Valve Castel 5/8″
DESCRIPTION
The new Ball Valves 6570/6571 are designed for installation on commercial refrigerating systems and on civil and industrial conditioning plants, which use the following refrigerant fluids: R22, R134a, R404A, R407C, R410A, R507 proper to the group II.
Ball valves are available in the following two types:
- Type 6570 (full port) and type 6571 (reduced port) without access fitting.
- Type 6570/A (full port) with access fitting, These ball valves are equipped with valve core 8394/A and blind nut 7020/20.
Rp0,00Ball Valve Castel 5/8″
Rp0,00 -
Ball Valve Castel 7/8″
DESCRIPTION
The new Ball Valves 6570/6571 are designed for installation on commercial refrigerating systems and on civil and industrial conditioning plants, which use the following refrigerant fluids: R22, R134a, R404A, R407C, R410A, R507 proper to the group II.
Ball valves are available in the following two types:
- Type 6570 (full port) and type 6571 (reduced port) without access fitting.
- Type 6570/A (full port) with access fitting, These ball valves are equipped with valve core 8394/A and blind nut 7020/20.
Rp0,00Ball Valve Castel 7/8″
Rp0,00 -
Ball Valve Danfoss GBC 10S 3/8″
Kami menjual Ball Valve Danfoss GBC 10S 3/8″
Katup bola GBC dioperasikan secara manual katup penutup yang cocok untuk aplikasi di mana aliran dua arah merupakan persyaratan.
Katup GBC disetujui untuk aplikasi dalam saluran cairan, hisap, dan gas panas dalam sistem pendingin dan pendingin udara.
Katup GBC menawarkan keketatan maksimum di kursi dan segel, dengan penurunan tekanan minimum.
Katup GBC memberikan aliran maksimum dalam posisi terbuka penuh. Mereka dirancang untuk operasi dalam kisaran suhu yang luas dan disetujui untuk digunakan dengan refrigeran berfluorinasi. Katup GBC standar dapat digunakan dalam aplikasi yang menggunakan pendingin bertekanan tinggi, termasuk R410A, dan katup bola dua arah GBC dapat dikirimkan dengan atau tanpa port akses eksternal.
Untuk aplikasi CO2, rentang khusus tersedia dengan maks. tekanan kerja 90 bar (1300 psig).
Katup GBC dilengkapi dengan penutup segel satu bagian untuk mencegah gangguan. Sesuai dengan European Safety Directive EN 378 (Persyaratan keselamatan dan lingkungan).Rp0,00 -
Ball Valve Danfoss GBC 12S 1/2″
Kami menjual Ball Valve Danfoss GBC 12S 1/2″
GBC ball valves are manually operated shut-off valves suitable for applications where bi-directional flow is a requirement.
GBC valves are approved for applications in liquid, suction, and hot gas lines in refrigeration and air conditioning systems.
GBC valves offer maximum tightness across the seat and seal, with minimum pressure drop.
GBC valves give maximum flow in the fully open position. They are designed for operation within a broad temperature range and are approved for use with any fluorinated refrigerant. Standard GBC valves may be used in applications using high pressure refrigerants, including R410A, and GBC bi-directional ball valves can be delivered with or without external access port.
For CO2 applications a dedicated range is available with a max. working pressure of 90 bar (1300 psig).
GBC valves are equipped with a one-piece seal cap to prevent tampering. Complies with European Safety Directive EN 378 (Safety and environmental requirements).Rp0,00