Best Seller Items
-
Oil Emkarate 4MO
DESCRIPTION
EMKARATE, RL MO Seriers are formulated from a selection of highly refined naphthenic mineral oil base stocks to provide outstanding performance and long life in today’s refrigeration systems. RL MO Series lubricants are designed to meet OEM requirements for compressor lubrication at extreme operating conditions .
EMKARATE, RL MO Series are chemically and thermally stable for cleaner operating performance, has virtually no wax contant which prevents doposits leading to system restrictions while provinding the required miscibility with HCFC, CFC and low GWP natural refrigerant .
Rp0,00Oil Emkarate 4MO
Rp0,00 -
Low Pressure Gauge Danfoss KP 1 Manual
Product Description
KP pressure controls are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure. The controls are also used for starting ans stopping refrigeration compressors and fans on air- cooled condensers. KP pressure controls are available in IP 30 and IP 44 enclosures.
Product Features
- Ambient temperature:–40 – +65°C (+80°C for max. 2 hours). DIN-approved units:–40 – +65°C (+80°C for max. 2 hours). Max. working pressure = 17 bar Max. test pressure = 20 bar Contact load, AC: AC1: 16 A, 400 V AC3: 16 A, 400 V AC15: 10 A, 400 V Max. starting current (L.R.): 112 A, 400 V Contact load, DC: DC13: 12 W, 220 V control current
Rp0,00 -
Compressor Copeland Scroll ZR48KC-TFD-522
Kami menjual Compressor Copeland Scroll ZR48KC-TFD-522
Compressor Copeland Scroll ZR48KC-TFD-522
HCFC, R-22, Mid Point, 50Hz, 3Phase, 380/420V
Capacity/BTU : 40500-47800
Power/Watt : 3600-2490
Current/Amps : 6.1-5
EER ( BTU/wh ) : 11.2-19.2
Mass Flow ( lbs/hr ) : 595.0-615.0
Sound Power ( dBa ) : 68Ave-73Max
Vibration : 2.0Ave-3.0MaxRp0,00 -
Compressor Manuerop Danfoss MT 64-4VM
Kami menjual Compressor Manuerop Danfoss MT 64-4VM
-
Compressor Kulkas Handen ADW 91 1/4hp
Kami menjual Compressor Kulkas Handen ADW 91 1/4hp
220/240Volt – 50/60HZ
R 134A
Rp0,00 -
Compressor Kulkas Handen ADW 43 1/10
Kami menjual Compressor Kulkas Handen ADW 43 1/10
220-240Volt – 50/60HZ
R134A
Rp0,00
-
Filter Drier Danfoss DML 304
Kami menjual Filter Drier Danfoss DML 304
DML ELMINATOR hermetic filter driers protect refrigeration and air conditioning systems from moisture, acids and solid particles, eleminating harmful chemical reaction and abrasive impurities . DML hermetic filter driers, with a 100% solid molecular sieve core, are recommended for use with HFO, HC, HFC and HCFC refrigerants . They are hermetic and available in many sizes and connection types .
APPLICATIONS
- Traditional refrigeration
- Air Conditioning units
- Transport Refrigeration
- High Drying capacity avoiding the risk of acid formation in the refrigeration system
- All danfoss filter driers have end caps designed for greater protection and easy removal
- Wide range with size : 1.5-75 cubic inches
- Corrosion resistant powder-painted finish, tested for 500 hrs in salt spray
- 100% 3A molecular sieve core
- Recommended for use with HFO, HC, HFC, and HCFC refrigerants ( face seal connectors for HFO refrigerants available upon request,please contact your sales representative )
- PS/MWP up to 46 bar/667 psig
- Available with flare, solder ( pure cooper, cu-plated ) connections .
Rp0,00Filter Drier Danfoss DML 304
Rp0,00 -
Filter Drier Danfoss DML 305
Kami menjual Filter Drier Danfoss DML 305
DML ELMINATOR hermetic filter driers protect refrigeration and air conditioning systems from moisture, acids and solid particles, eleminating harmful chemical reaction and abrasive impurities . DML hermetic filter driers, with a 100% solid molecular sieve core, are recommended for use with HFO, HC, HFC and HCFC refrigerants . They are hermetic and available in many sizes and connection types .
APPLICATIONS
- Traditional refrigeration
- Air Conditioning units
- Transport Refrigeration
- High Drying capacity avoiding the risk of acid formation in the refrigeration system
- All danfoss filter driers have end caps designed for greater protection and easy removal
- Wide range with size : 1.5-75 cubic inches
- Corrosion resistant powder-painted finish, tested for 500 hrs in salt spray
- 100% 3A molecular sieve core
- Recommended for use with HFO, HC, HFC, and HCFC refrigerants ( face seal connectors for HFO refrigerants available upon request,please contact your sales representative )
- PS/MWP up to 46 bar/667 psig
- Available with flare, solder ( pure cooper, cu-plated ) connections .
Rp0,00Filter Drier Danfoss DML 305
Rp0,00 -
Oil Separator BlueGreen 3/8″
Deskripsi:
Rincian produk
Nomor Model: BLR / A-W 55833
Kapasitas Produksi: 10000
Tanggal Pengiriman: 15-20 hari setelah diterima …
Jenis: Top-Freezer
Bahan: Lainnya
Gunakan: Komersial
WARNA: HITAM / BIRU / HIJAU
Alat Transportasi: Laut, Udara
Packing: CTN PLT
Fitur: Kompresor
Sumber Daya: Lainnya
Sertifikasi: CE
Nama merek: BIRUBLR / AW & BLR / AF Pemisah Minyak Sealed Dan Flanged
◆ Tujuan umum dari Pemisah Minyak adalah untuk memisahkan gas buangan berminyak dan memastikan daur ulang minyak secara teratur dan benar ke kasing kompresor.
◆ Separator oli digunakan untuk membentuk suhu oli yang tinggi dan mencegah migrasi cairan pendingin dan gas, serta memisahkan cairan pendingin dalam oli dan mengeluarkan gas.
◆ Sistem pelampung melewati proses produksi yang sangat akurat, dan kemudian operasinya yang sepenuhnya sempurna dipastikan melalui berbagai tes.
◆ Separator oli harus dipilih sesuai dengan sifat kompresor yang digunakan.
◆ Pemisah oli harus digunakan secara vertikal antara kompresor dan kondensor.
◆ Separator oli tipe standar cukup mudah digunakan karena tidak ada komponen yang dapat diganti.
◆ Ini adalah produk yang lebih murah dibandingkan dengan jenis pemisah minyak lainnya.
◆ Pemisah minyak adalah produk mekanis, dan karenanya pemisah tersebut menjalani proses produksi yang cukup akurat.
◆ Bahan yang digunakan dalam produk; bola pelampung dan ratchet, filter oli dan separator, dan pin katup sepenuhnya terbuat dari bahan stainless.
◆ Tabung pengembalian minyak dan pelampung terbuat dari bahan kuningan.Bagian Koneksi
◆ Kami menentukan koneksi Input dan Output sesuai dengan volume produk
◆ Koneksi ODS digunakan dalam produk standar.
◆ Koneksi yang berbeda dapat digunakan berdasarkan permintaan.Catatan
◆ Perusahaan kami memproduksi produk dengan diameter, panjang, dan properti yang diperlukan sesuai dengan standar yang relevan.
◆ Warna yang berbeda dapat digunakan atas permintaan dalam jumlah kuantitas.
◆ Pemisah Minyak diproduksi sesuai dengan arahan CE 97/23 / EC.
◆ Silakan, hubungi kami untuk detail lebih lanjut.Rp0,00Oil Separator BlueGreen 3/8″
Rp0,00 -
Compressor Maneurop Danfoss MTZ 160-4VM
Kami menjual Compressor Manuerop Danfoss MTZ 160-4VM
Specification :
Type Code MTZ Net weight 71.00 Kg Approval standards CE; UL Brand technique Reciprocating compressor Capacity control Fixed speed Colour Blue Configuration code Single Connection type Rotolock Cylinder 4 Diameter [mm] 352 Discharge connection height [mm] 125 Discharge connection mounting torque [Nm] 90 Discharge connection pipe size [in] 3/4 Discharge connection rotolock size [in] 1 1/4 Discharge connection size [in] 1 1/4 Discharge connection sleeve pipe size [in] 3/4 Drawing number 8504011e EAN 5702428867368 Economizer No Factory HP [bar] 25 Factory LP [bar] 25 Fitting remark (shipped with rotolock version only) Fitting sleeve ODF Fitting standard Rotolock Frequency [Hz] 50/60 GP LP torque [Nm] 15 Gauge port HP None Gauge port LP Schrader Generation code no Glass mounting Threaded Glass torque [Nm] 50 Gross weight 73.50 Kg High value of nominal voltage at 50Hz [V] 400 High value of nominal voltage at 60Hz [V] 460 High value of voltage range at 50Hz [V] 460 High value of voltage range at 60Hz [V] 506 IP protection class IP54 (with cable gland) LRA 130 A Low value of nominal voltage at 50Hz [V] 380 Low value of nominal voltage at 60Hz [V] 460 Low value of voltage range at 50Hz [V] 340 Low value of voltage range at 60Hz [V] 414 MCC 36 A Model number MTZ160HW4AVE Motor protection Internal overload protector Mounting torque [Nm] 50 Nominal cooling capacity at 50Hz 20.3 Nominal cooling capacity at 60Hz 25.6 Number of starts per hour [Max] 12 Oil charge [L] 3.9 Oil equalization 3/8” flare SAE Oil equalization torque [Nm] 30 Oil reference 160PZ Packaging height [mm] 650 Packaging length [mm] 1150 Packaging weight [Kg] 446 Packaging width [mm] 800 Packing format Industrial pack Packing quantity 6 Phase 3 Power connections Screw connectors 10-32 UNF x 9.5 Refrigerant R134a; R404A; R407A; R407C; R407F; R507A Refrigerant charge [kg] [Max] 10 Relief valve 30 bar/8 bar Rotational speed at 50Hz [rpm] 2900 Rotational speed at 60Hz [rpm] 3500 Segment usage Air conditioning; Refrigeration MT Shipped fittings Suction and discharge solder sleeves, rotolock nuts and gaskets Shipped instructions Installation instructions Shipped mounting Mounting kit with grommets, bolts, nuts, sleeves and washers Shipped oil Initial oil charge Rp0,00 -
Oli Suniso 4 GS ( 4 ltr )
Oli Suniso 4GS
Suniso oil seri GS merupakan minyak pelumas (mineral oil) untuk oli kompresor AC dengan kualitas premium, dirancang untuk digunakan sebagai oli kompresor pendingin.
- Oli SUNISO seri GS mampu bekerja dengan baik pada sistem yang menggunakan pendingin HCFC dan CFC, seperti R22, R502 dan R12 ,menunjukkan stabilitas yang sangat baik dan bekerja tanpa masalah di sistem pendingin menggunakan yang menggunkan refrigerant di atas. Selain itu, SUNISO GS juga berfungsi sangat baik pada pendingin alami seperti R717 amonia, R600a isobutane dan R290 propane.
- Oli SUNISO seri GS diproses dari minyak mentah nafta ,diproses dengan menggunakan metode khusus , sehingga menjamin pelumasan yang sangat baik.
- Oli SUNISO seri GS juga telah diterima disetujui oleh semua produsen AC, kulkas, freezer, ternama di dunia.
Chemical Stability
Untuk menolak reaksi kimia dengan pendingin atau bahan lain biasanya hadir dalam sistem.
Thermal Stability
Untuk menghilangkan deposit karbon yang berlebihan pada hot spot kompresor seperti katup atau port debit.
Low Wax Content
Untuk mencegah pemisahan lilin flokulan dari campuran minyak-refrigeran pada titik-titik suhu rendah dalam sistem.
Low Pour Point
Untuk mencegah minyak terpisah dari mengental di garis refrigerant.
High Dielectric Strength
Untuk memastikan sifat isolasi yang baik. Dalam unit kedap udara, campuran minyak-refrigeran berfungsi sebagai isolator antara motor dan tubuh kompresor.
Proper Viscosity
Bahkan ketika diencerkan dengan pendingin sehingga untuk memastikan kekuatan film tinggi pada suhu operasi yang tinggi dan sekaligus memberikan fluiditas yang baik di bawah kondisi operasi yang paling dingin.
No Contamination
Untuk mencegah jaringan parut dari permukaan bantalan, ditusuk dari garis atau port minyak dan kerusakan umum.Rp0,00Oli Suniso 4 GS ( 4 ltr )
Rp0,00 -
Ball Valve Danfoss GBC 6S 1/4″
Kami menjual Ball Valve Danfoss GBC 6S 1/4″
GBC ball valves are manually operated shut-off valves suitable for applications where bi-directional flow is a requirement.
GBC valves are approved for applications in liquid, suction, and hot gas lines in refrigeration and air conditioning systems.
GBC valves offer maximum tightness across the seat and seal, with minimum pressure drop.
GBC valves give maximum flow in the fully open position. They are designed for operation within a broad temperature range and are approved for use with any fluorinated refrigerant. Standard GBC valves may be used in applications using high pressure refrigerants, including R410A, and GBC bi-directional ball valves can be delivered with or without external access port.
For CO2 applications a dedicated range is available with a max. working pressure of 90 bar (1300 psig).
GBC valves are equipped with a one-piece seal cap to prevent tampering. Complies with European Safety Directive EN 378 (Safety and environmental requirements).Rp0,00 -
Filter Drier Danfoss DML 306
DML ELMINATOR hermetic filter driers protect refrigeration and air conditioning systems from moisture, acids and solid particles, eleminating harmful chemical reaction and abrasive impurities . DML hermetic filter driers, with a 100% solid molecular sieve core, are recommended for use with HFO, HC, HFC and HCFC refrigerants . They are hermetic and available in many sizes and connection types .
APPLICATIONS
- Traditional refrigeration
- Air Conditioning units
- Transport Refrigeration
- High Drying capacity avoiding the risk of acid formation in the refrigeration system
- All danfoss filter driers have end caps designed for greater protection and easy removal
- Wide range with size : 1.5-75 cubic inches
- Corrosion resistant powder-painted finish, tested for 500 hrs in salt spray
- 100% 3A molecular sieve core
- Recommended for use with HFO, HC, HFC, and HCFC refrigerants ( face seal connectors for HFO refrigerants available upon request,please contact your sales representative )
- PS/MWP up to 46 bar/667 psig
- Available with flare, solder ( pure cooper, cu-plated ) connections .
Rp0,00Filter Drier Danfoss DML 306
Rp0,00 -
Low Pressure Gauge Danfoss KP 1 Manual
Product Description
KP pressure controls are for use in refrigeration and air conditioning systems to give protection against excessively low suction pressure or excessively high discharge pressure. The controls are also used for starting ans stopping refrigeration compressors and fans on air- cooled condensers. KP pressure controls are available in IP 30 and IP 44 enclosures.
Product Features
- Ambient temperature:–40 – +65°C (+80°C for max. 2 hours). DIN-approved units:–40 – +65°C (+80°C for max. 2 hours). Max. working pressure = 17 bar Max. test pressure = 20 bar Contact load, AC: AC1: 16 A, 400 V AC3: 16 A, 400 V AC15: 10 A, 400 V Max. starting current (L.R.): 112 A, 400 V Contact load, DC: DC13: 12 W, 220 V control current
Rp0,00 -
Selenoid Danfoss EVR 6 1/2″
Product Description
EVR (NC) is a normally closed, direct or servo operated solenoid valve for liquid, suction and hot gas lines with fluorinated refrigerants. EVR valves are supplied complete or as separate components, i.e. valve body, coil and flanges.
Product Features
- Refrigerants: R22/R407C, R404A/R507, R410A, R134a, R407A, R23. For other refrigerants, please contact Danfoss. Temperature of medium: -40 – +105°C (10 W / 12 W coil) Max. 130°C during defrosting. Min. opening differential pressure, EVR 2-3: 0.0 bar, EVR 6-22: 0.05 bar, EVR 25-32: 0.20 bar.
Rp0,00Selenoid Danfoss EVR 6 1/2″
Rp0,00 -
Compressor Maneurop Danfoss MT100-4VM
Specification :
Type Code MT Net weight 63.00 Kg Approval standards CE; UL Brand technique Reciprocating compressor Capacity control Fixed speed Colour Blue Configuration code Single Connection type Rotolock Cylinder 4 Diameter [mm] 352 Discharge connection height [mm] 125 Discharge connection mounting torque [Nm] 90 Discharge connection pipe size [in] 3/4 Discharge connection rotolock size [in] 1 1/4 Discharge connection size [in] 1 1/4 Discharge connection sleeve pipe size [in] 3/4 Drawing number 8504010f Economizer No Factory HP [bar] 25 Factory LP [bar] 25 Fitting remark (shipped with rotolock version only) Fitting sleeve ODF Fitting standard Rotolock Frequency [Hz] 50/60 GP LP torque [Nm] 15 Gauge port HP None Gauge port LP Schrader Generation code D Glass mounting Threaded Glass torque [Nm] 50 Gross weight 65.33 Kg High value of nominal voltage at 50Hz [V] 400 High value of nominal voltage at 60Hz [V] 460 High value of voltage range at 50Hz [V] 460 High value of voltage range at 60Hz [V] 506 IP protection class IP54 (with cable gland) LRA 90 A Low value of nominal voltage at 50Hz [V] 380 Low value of nominal voltage at 60Hz [V] 460 Low value of voltage range at 50Hz [V] 340 Low value of voltage range at 60Hz [V] 414 MCC 22 A Model number MT100HS4DVE Motor protection Internal overload protector Mounting torque [Nm] 50 Nominal cooling capacity 60 kBTU/h 95.9 Nominal cooling capacity at 50Hz 21.3 Nominal cooling capacity at 60Hz 28.1 Number of starts per hour [Max] 12 Oil charge [L] 3.9 Oil equalization 3/8” flare SAE Oil equalization torque [Nm] 30 Oil reference 160P Packaging height [mm] 650 Packaging length [mm] 1150 Packaging weight [Kg] 431 Packaging width [mm] 800 Packing format Industrial pack Packing quantity 6 Phase 3 Power connections Screw connectors 10-32 UNF x 9.5 Refrigerant R22 Refrigerant charge [kg] [Max] 10 Relief valve 30 bar/8 bar Rotational speed at 50Hz [rpm] 2900 Rotational speed at 60Hz [rpm] 3500 Segment usage Air conditioning; Refrigeration MT Shipped fittings Suction and discharge solder sleeves, rotolock nuts and gaskets Shipped instructions Installation instructions Shipped mounting Mounting kit with grommets, bolts, nuts, sleeves and washers Shipped oil Initial oil charge Speed Platform Fixed-speed Rp0,00 -
Ball Valve Danfoss GBC 10S 3/8″
Kami menjual Ball Valve Danfoss GBC 10S 3/8″
Katup bola GBC dioperasikan secara manual katup penutup yang cocok untuk aplikasi di mana aliran dua arah merupakan persyaratan.
Katup GBC disetujui untuk aplikasi dalam saluran cairan, hisap, dan gas panas dalam sistem pendingin dan pendingin udara.
Katup GBC menawarkan keketatan maksimum di kursi dan segel, dengan penurunan tekanan minimum.
Katup GBC memberikan aliran maksimum dalam posisi terbuka penuh. Mereka dirancang untuk operasi dalam kisaran suhu yang luas dan disetujui untuk digunakan dengan refrigeran berfluorinasi. Katup GBC standar dapat digunakan dalam aplikasi yang menggunakan pendingin bertekanan tinggi, termasuk R410A, dan katup bola dua arah GBC dapat dikirimkan dengan atau tanpa port akses eksternal.
Untuk aplikasi CO2, rentang khusus tersedia dengan maks. tekanan kerja 90 bar (1300 psig).
Katup GBC dilengkapi dengan penutup segel satu bagian untuk mencegah gangguan. Sesuai dengan European Safety Directive EN 378 (Persyaratan keselamatan dan lingkungan).Rp0,00 -
Ball Valve Danfoss GBC 12S 1/2″
Kami menjual Ball Valve Danfoss GBC 12S 1/2″
GBC ball valves are manually operated shut-off valves suitable for applications where bi-directional flow is a requirement.
GBC valves are approved for applications in liquid, suction, and hot gas lines in refrigeration and air conditioning systems.
GBC valves offer maximum tightness across the seat and seal, with minimum pressure drop.
GBC valves give maximum flow in the fully open position. They are designed for operation within a broad temperature range and are approved for use with any fluorinated refrigerant. Standard GBC valves may be used in applications using high pressure refrigerants, including R410A, and GBC bi-directional ball valves can be delivered with or without external access port.
For CO2 applications a dedicated range is available with a max. working pressure of 90 bar (1300 psig).
GBC valves are equipped with a one-piece seal cap to prevent tampering. Complies with European Safety Directive EN 378 (Safety and environmental requirements).Rp0,00